| Welcome to Octoplus/Octopus Box Samsung software version 1.8.1
-----------------------------------------------------------------------------------
To connect GT-I9515 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
Selected firmware file: PIT_I9195XXUBML4_2340422_MULTI_CERT.oct
Please put the phone into Download Mode and connect USB cable.
To put GT-I9515 into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing PIT section...
Writing Firmware Failed
battaer full charge but get this error |