Quote:
Originally Posted by aleshek If i tried oficial Alcatel upgrade tool (for 4030D), it says "You select a wrong model name, try again...". Is it possible change or repair model descriptor?
Thank you very much for help again :-)
Ales |
Method #1 :
You can flash
THIS pro_info, from 4030x,
just change pid to any you like.
METHOD #2
Use attached scatter file, Read NVRAM first with SPFT.
Tab READ MEMORY, start address : 0x1460000 , length : 0x500000,
select file name (nvram.bin), select save location, press read and connect phone.
After, use FULL format from SPFT.
Then - Use testpoint, connect red marked point to ground,
connect phone to usb cable (I think can be flashed without battery),
flash preloader and dsp_bl, after that flash normally, without testpoint.
(TP image attached)
dram errors can come from incompatible preloader.bin and dsp_bl.
pro_info file - you can use some from sticky thread.
try and post results.
b.r.
Alex