| thanks dear for replay
Welcome to Octoplus/Octopus Box Samsung software version 1.9.0
-----------------------------------------------------------------------------------
To connect GT-I9301I phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM9
Selected model: GT-I9301I
Please select service IMEI for this phone model
Please, press "OK" button on the phone to allow USB debugging..
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
Write IMEI failed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM9
Selected model: GT-I9301I
Please select service IMEI for this phone model
Please, press "OK" button on the phone to allow USB debugging..
Please, press "OK" button on the phone to allow USB debugging..
Detected phone model: GT-I9301I
Firmware compiled date: Tue Oct 28 18:47:03 KST 2014
PDA version: I9301IXCUANJ6
CSC version: I9301IITVANJ1
SW version: I9301IXXUANI2
Phone IMEI: Unknown
Phone SN: RV1FB2A1CDP
Android version: 4.4.2 (KOT49H)
Cheking Root
Phone is Rooted
Reading security backup, please wait...
Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung
\BACKUP\Security-GT-I9301I-30-03-2015_14-58-55-.asec file
Deactivating MSL...
MSL deactivate successfully
Phone will restart now. Please don't disconnect cable!
After phone being rebooted and powered on perform the following
steps:
1. Disconnect USB cable.
2. Wait for 1-2 minutes.
3. Connect phone via UART cable to the Box.
4. Note: phone screen must be active
Connecting to phone, please wait...
Found phone on COM9
Phone connected successfully
Writing new phone IMEI...
IMEI successfully repaired.
To finish the operation, please restart the phone via phone's menu
(don't disconnect the battery!)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM9
Selected model: GT-I9301I
Phone was not found on the selected port!
Searching for USB diagnostic port...
No diagnostic ports found!
Connecting to phone on COM9
Phone connection failed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM9
Selected model: GT-I9301I
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM52
Port is busy
No diagnostic ports found!
Connecting to phone on COM9
Phone connection failed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM9
Selected model: GT-I9301I
Mode: Emergency
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM9
Selected model: GT-I9301I
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM52
Mode: Emergency
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-I9301I
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM55
Mode: Emergency
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-I9301I
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM55
Mode: Emergency
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM55
Selected model: GT-I9301I
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM53
Mode: Normal
Phone model: GT-I9301I
Firmware compiled date: Mar 31 2014
Firmware compiled time: 12:00:00
Firmware released date: Sep 9 2014
Firmware released time: 16:34:00
Phone IMEI: 357537-06-406335-7
SW version: M8626A-AAAANAZM-1.0.4050
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM53
Selected model: GT-I9301I
Mode: Normal
Phone model: GT-I9301I
Firmware compiled date: Mar 31 2014
Firmware compiled time: 12:00:00
Firmware released date: Sep 9 2014
Firmware released time: 16:34:00
Phone IMEI: 357537-06-406335-7
SW version: M8626A-AAAANAZM-1.0.4050
Repairing 3G/4G...
Reading nv...
Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung
\BACKUP\NV-GT-I9301I-357537064063357-30-03-2015_15-11-20-.nv
file
3G/4G repair successfully
To finish the operation, please restart the phone via phone's menu
(don't disconnect the battery!)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM53
Selected model: GT-I9301I
Reading info...
Mode: Normal
Firmware compiled date: Mar 31 2014
Firmware compiled time: 12:00:00
Firmware released date: Sep 9 2014
Firmware released time: 16:34:00
SW Version: M8626A-AAAANAZM-1.0.4050
Send SPC...
SPC send successfully
Writing QCN...
Writing NV items...
NV items write successfully
Writing NV SIM1 items...
NV SIM1 items write successfully
Writing NV SIM2 items...
NV SIM2 items write successfully
Wrting EFS...
EFS write successfully
Writing provisioning items...
Provisioning items write successfully.
Writing QCN done
QCN write successfully
Please, restart the phone to apply changes
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM53
Selected model: GT-I9301I
Mode: Normal
Phone model: GT-I9301I
Firmware compiled date: Mar 31 2014
Firmware compiled time: 12:00:00
Firmware released date: Sep 9 2014
Firmware released time: 16:34:00
Phone IMEI: 357537-06-406335-7
SW version: M8626A-AAAANAZM-1.0.4050
Repairing 3G/4G...
Reading nv...
Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung
\BACKUP\NV-GT-I9301I-357537064063357-30-03-2015_15-31-30-.nv
file
3G/4G repair successfully
To finish the operation, please restart the phone via phone's menu
(don't disconnect the battery!) |