[effel]

Originally Posted by mastersgsm

error code same CMD1 Reply: 0x00FF8080 ?

@mastergsm,NOT Same ...

* that is my log,first scan emmc :

5E5E5E5E5E
0000000000
5E5E5E5E5E
0000000000
5E5E5E5E5E
ERROR: EMMC WAS NOT Detected! (CMD1)
Check your Test Point Soldering!
CMD1 Reply: 0x00000000

NB : Test point is OK

* Repeat Scan emmc (with TP to Ground) :

================================================== ====
================================================== ====
eMMC Test Point Connection Module
================================================== ====
================================================== ====

1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.

1F007F8000
1F007F8000
1F007F8000
1F007F8000
1F007F8000
1F007F8000
1F007F8000
1F007F8000
1F007F8000
1F007F8000
1F007F8000
1F007F8000
3F00FF8000
3F007F8000
1F007F8080
1F007F8000
3F007F8000
1F007F8080
1F007F8000
3F007F8000
1F007F8000
1F007F8080
3F007F8000
3F00FF8080
1FC07F8080

Interface Reset OK!
eMMC Access Type: SECTOR MODE
eMMC Supported Voltage Range:
3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V, 3.0-3.1V
2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V

CID : 15010030303030301000201000020067
CSD : D02701320F5903FFF6DBFFE796404053

eMMC Boot Information
Revision 1.5 (for MMC v4.41)
BOOT PARTITION : NOT BOOT ENABLED
PARTITION ACCESS : R/W USER PARTITION
PERM_BOOT_CFG_PROT : DISABLED
PWR_BOOT_CFG_PROT : DISABLED
BOOT MODE : x1 SINGLE DATA RATE + LOW SPEED
RESET BUS WIDTH : ENABLED
eMMC FirmW UPDATE : DISABLED
EMMC CACHE SIZE : 0 KB
SUPER PAGE SIZE : 3072 KB
HC ERASE GROUP SIZE: 512 KB
USER AREA SIZE : 8589934592 BYTES
BOOT PARTITION SIZE: 1024 KB
RPMB PARTITION SIZE: 1024 KB


eMMC Device Information
Manufacturer ID: SAMSUNG
Device Type : Embedded BGA
Application ID : 00
Product Name : 00000
Product Rev : 0.0
Product SN : 20100002
Manufactured : January 1997

Card Specific Data
CSD_STRUCTURE : Extended
SPEC_VERS : Version 4.1/4.2/4.3
TAAC : 13 ns
TRAN_SPEED : 4000000 KHz
READ_BL_LEN : 512 Bytes
C_SIZE : HIGH CAPACITY
WP_GRP_ENABLE : YES
WRITE_BL_LEN : 512 Bytes
CONTENT_PROT_APP : NO
PERM_WRITE_PROTECT: NO
TMP_WRITE_PROTECT : NO

Extended CSD Saved:
15010030303030301000201000020067.ext_csd
Backup Directory:
C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\

* emmc Update firmware :

File Author: ATF Team @ X-Shadow
Date Created: 21/02/2015 (dd/mm/yyyy)
Description: Samsung eMMC Firmware
eMMC Part Number: KMVTU000LM-B503
eMMC Product Name: VTU00M
eMMC Product Rev: 15.7

Preparing eMMC for Firmware Update...
Sending eMMC Firmware Blocks...
Write Block 0 Busy Timeout
Samsung eMMC Firmware Programming FAILED!!!
Total Elapsed Time 00:00:02

From LOG,that is emmc death or not ?!