a500f sapprot Direct Unlock with install_octoplus_octopus_Samsung_1.9.3
Cable: Micro USB
Samsung SM-A500F (Galaxy A5)
1. Available operations
2. Cables for connection
3. Necessary drivers
4. Write Firmware
5. Direct Unlock
6. Repair EFS
7. Read QCN
8. Write QCN
9. Write Certificate
10. Wipe Security
11. Download Mode
12. FAQ
1. Available operations
Read Info (cable: Micro USB);
Write Firmware (cable: Micro USB);
Read NVM (cable: Micro USB);
Write NVM (cable: Micro USB);
Repair NVM (cable: Micro USB);
Direct Unlock (cable: Micro USB);
Repair EFS (cable: Micro USB);
Read QCN (cable: Micro USB);
Write QCN (cable: Micro USB);
Write Certificate (cable: Micro USB);
Wipe Security (cable: Micro USB).
Back to main menu
2. Cables for connection
Micro USB cable
Back to main menu
Samsung Micro UART cable
Back to main menu
3. Necessary drivers
For correct work with the phone install "SAMSUNG USB Driver for Mobile Phones" driver.
Back to main menu
4. Write Firmware
Put phone into Download Mode.
Connect the phone to PC via Micro USB cable.
Install required driver.
Select firmware file.
Click "Write firmware" button.
Follow software instructions (prompts).
Note: Please, before firmware write, disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Android-based devices). Dont run any other programs or attach new devices to your computer during the flashing procedure! Don't turn off phone and don't disconnect cable during firmware write. Please, follow these simple instructions to avoid phone damage.
Back to main menu
5. Direct Unlock
Connect powered-on phone to PC via Micro USB cable.
Install necessary driver.
Click "Unlock" button.
Follow software instructions (prompts).
Back to main menu
6. Repair EFS
Put phone into Download Mode
Connect the phone to PC via Micro USB cable.
Install required driver.
Click "Repair EFS" button.
Follow software instructions (prompts).
Back to main menu
7. Read QCN
Connect powered-on phone to PC via Micro USB cable.
Install necessary driver.
Click "Read QCN" button.
Follow software instructions (prompts).
Back to main menu
8. Write QCN
Connect powered-on phone to PC via Micro USB cable.
Install necessary driver.
Click "Write QCN" button.
Follow software instructions (prompts).
Back to main menu
9. Write Certificate
Root your phone manually.
Wipe Security
Connect powered-on phone to PC via Micro USB cable.
Install necessary driver.
Click "Write Cert" button.
Follow software instructions (prompts).
Back to main menu
10. Wipe Security
Root your phone manually.
Connect powered-on phone to PC via Micro USB cable.
Install necessary driver.
Click "Repair Security/Wipe Security" button.
Follow software instructions (prompts).
Back to main menu
11. Download Mode
To enter Download Mode, reconnect the battery, press and hold "Volume down" + "Volume up" and connect USB cable.
Back to main menu
12. FAQ
Q: My phone not found by program. How can I configure my phone?
A: Provide following steps:
Disconnect USB cable from phone (if connected).
Go to Menu->Settings->Applications->Development.
Turn on "USB Debugging" option.
When message is appear press "Yes".
Press "Read Info" in Octopus Samsung software.
Back to main menu
Report Post |