Nokia n78-1 security code reset throw Format function.
Connect phone on selected interface...
Backup Certificates now...
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000010000022600010006400C192101021103
CPU ID : RAPIDOv11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 06B001142EBE0058FF5CD408B1935B59E4A9BA2D
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: A8C1D6713E691FF8
Use URAPIDOv11_2nd.fg , Rev : 2.0 Ver : 12.8.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.5
Use URAPIDOv11_XSR15_alg.fg , Rev : 2.0 Ver : 12.8.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:00
CFL: Wait for Loader take control ...
CFL: Check mode
Phone ready, boot Ok
TransReq set Ok
PAPUBkeys : AA7BE8DEFFAE81DD0C61CB7E127E3A2962651FD6
CFL : Reading flash certs....
CFL : Reading NPC
IMEI : 352057023949906
CFL : Reading CCC
CFL : Reading HWC
CFL: Close_Session
Content: 000300000000010000000100000000
CFL: Reboot
Wait, reconneting...
SLx Simlock Data read ... Ok
SL2 Simlock read ... Ok
WMDRM read ... Ok
CRT308 Backup Created
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...
Swap data collected to 0548518.pc
RPL saved : C:\InfinityBox\BEST\Backup\Cert\352057023949906.rp l
All done, Disconnecting
Elapsed: 00:00:25
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Reading Phone Info....
Connected phone - Nokia N78
Software ver : V ICPR71_08w24.2 25-06-08 RM-235 (c) Nokia
IMEI : 352057023949906
XappVer : 00000816
Ape Ver : 12.046
APE Var : 12.04612.046.023.112.046.051.1
APE ADSP: 256
DSP Ver : merlin_ICPR71_08w22_p1
APE Test: rm235_ENO_x_2008wk09v0.010
PPM :
CNT :
Product SN : CUB476845
Product code : 0548518
Base Prd.code: 0531167
Long Prod.SN : 0
Hardware info=======
HWID : 6000
Retu : 15
Tahvo : 22
Batery: 3610 mV
APE HW: 256
Lock info ===========
IMEI : 352057023949906
IMEI spNet : 3A 25 50 07 32 49 99 00
IMEI svNet : 33 25 50 07 32 49 99 00 F5
Conf key : 0000000000000000
Provider key : 2440700000000000
Country : Finland
Operator : NOKIA (Open)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7
LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created
SDD key status : Ok
CMLA Key status : Ok
SimLock status : Ok
Security status : Ok
PA_SimLock Version :
PA_SL2 phone detected
User Code : E-series code : Decrypt failed
UserDataExLevel : Low [Gallery] , FullFlash method
Done!
Format File System...
Operating mode is OK, no need change...
Scanning FS parametres...
Checking Data...
Detected : 2 drive(s)...
Start formating....
Using Series 60 format algorithm...
==================================
Formating drive : C now...
Step1 : OK
Step2 : OK
End format...
==================================
Formating drive : D now...
Step1 : OK
Step2 : OK
End format...
==================================
Done!
Resetting selected items...
Check phone mode...
Phone in Local mode
Seting Test mode... wait...
Test mode set
Settings Full Factory Defaults...
Set OK!
Settings Software Upgrade Defaults...
Set OK!
Settings Service Centre Defaults...
Set OK!
Settings Production Tune Defaults...
Set OK!
Settings User Data Defaults...
Set OK!
Settings Leave Factory defaults...
Set OK!
Elapsed: 00:00:08