MicroDigit C2075-3G, read FF & NVRAM done-
Read Factory Firmware-
Code:
Operation : Read Flash [ v1.21 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 60 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 8801034E436172642020110500609175
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0088 , OEM : 0103
[eMMC] : FLASH_INF : draC
[eMMC] : FLASH_CID : 8801034E436172642020110500609175
[eMMC] : FLASH_LEN : 0x00000000E7400000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Conent now ...
Brand : alps
ProdName : tongjun72_et_jb3
ProdModel : C2075-3G
Device : tongjun72_et_jb3
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.MP.V1.17
[Read Ok] : preloader_tongjun72_et_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img
[ScatCFG] : MT6572 / V1.1.1 / tongjun72_et_jb3 / EMMC
FW Size : 678 MiB
Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6572__alps__C2075-3G__tongjun72_et_jb3__4.2.2__ALPS.JB3.MP.V1.17\
All done!
Done!
Elapsed: 00:03:22
Reconnect Power/Cable!
Read NVRAM-
Code:
Operation : Read NVRAM [ v1.21 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 60 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 8801034E436172642020110500609175
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0088 , OEM : 0103
[eMMC] : FLASH_INF : draC
[eMMC] : FLASH_CID : 8801034E436172642020110500609175
[eMMC] : FLASH_LEN : 0x00000000E7400000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Read Ok, Microdigit-C2075_MT6572_eMMC.spnv saved
Done!
Elapsed: 00:00:30
Reconnect Power/Cable!
Br.