Y511 SuccessFull flash Flash files count is :11
Action : Firmware update.
Selected Huawei: Ascend Y511-U30
Exe version: NCKBox AndroidMTK 1.8.5.2
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM18)
BBCHIP: MT6572_S00
BBCHIP HW: 0xCA01
BBCHIP SW: 0x0000
SECURE VERSION: 0
Phone detected...Please wait
Sending DA agent, please wait...
EMMC: (28Gb+4096Mb) HYNIX 0x483447316404
EMMC FW VERSION: 86:00:00:00:00:00:00:00
EMMC CID: 90014A4834473164048601A41B73910F
EMMC UA SIZE: 0xe7000000
BOOT STYLE: EMMC BOOT
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
Detected : MediaTek DA USB VCOM Port (COM26)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Starting flash.
Download firmware to flash now...
MBR checksum is executing ...
EBR1 checksum is executing ...
UBOOT checksum is executing ...
BOOTIMG checksum is executing ...
RECOVERY checksum is executing ...
SEC_RO checksum is executing ...
LOGO checksum is executing ...
ANDROID checksum is executing ...
CACHE checksum is executing ...
USRDATA checksum is executing ...
Wait untill phone will start charging.
All done. |