Hello !
1. I think that COM-Port COM-17 was correct. Check it again, please.
Here is attached picture of "Port" section in DeviceManager.
Correct port (on my picture) is COM5 (Infinity USB serial port).
2. You have to use for X300 cable with "G50" label. It's cable with Hands-Free jack with 4 (four) metal pins (pls, see attached picture too).
3. Insert cable into left RJ-45 connector (near Rx/Tx LEDs).
4. F-BUS/M-BUS switch on front side have to be in up position (F-BUS)
5. When you select correct COM port, start software and press "Unlock" button, you have to see GREEN LED is blinking very fast. This means that COM port selected Ok.
6. Now press phone Power button (Red button) for several seconds. When progress-bar start to move you can releas Power button.
B.R.
InfinitySupport
Quote:
|
Originally Posted by farry hi
just bought this product,tried to unlock a x300 but nothing!!heres what i did,
installed the drivers,soft, chose x300 ,left the toggle switch on,left the front toggle switch up,used the provided leads(the ones with the jack)chose the correct port settings,(i think)whatever it was showing in divice manager,it was 17, i then chose 1,then 2 but no commiunication!! please help,dont know what else to do,
br
farry |