GSM-Forum - View Single Post - SGH-T989 Phone is successfully unlocked..

shainelus · 08-10-2015, 21:20

Welcome to Octoplus/Octopus Box Samsung software version 2.0.3
-----------------------------------------------------------------------------------
To connect SGH-T989 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "Modem" value.
8. Press Home button.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SGH-T989
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM30
Mode: Normal
Phone model: AAABQOCZ
Phone model is not supported
Phone connection failed
Connecting to phone on COM28
Mode: Normal
Phone model: SGH-T989
Firmware compiled date: Jun 19 2012
Firmware compiled time: 23:00:00
Firmware released date: Jan 14 2013
Firmware released time: 19:22:01
Phone IMEI: 359858-04-XXXXXX-X
SW version: M9200B-SCAQCSZD-3.4.701096
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM28
Selected model: SGH-T989
Mode: Normal
Phone model: SGH-T989
Firmware compiled date: Jun 19 2012
Firmware compiled time: 23:00:00
Firmware released date: Jan 14 2013
Firmware released time: 19:22:01
Phone IMEI: 359858-04-XXXXXX-X
SW version: M9200B-SCAQCSZD-3.4.701096
Unlocking phone...
Phone is successfully unlocked
To finish the operation, please restart the phone via phone's menu.

08-10-2015, 21:20	#1 (permalink)
shainelus Freak Poster Join Date: Dec 2009 Location: JAM Posts: 430 Member: 1196714 Status: Offline Thanks Meter: 238	SGH-T989 Phone is successfully unlocked.. Welcome to Octoplus/Octopus Box Samsung software version 2.0.3 ----------------------------------------------------------------------------------- To connect SGH-T989 phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->Applications->Development. 3. Turn on "USB Debugging" option. 4. When message is appear press "Yes". 5. Go to dial window. 6. Enter "#7284#" number. 7. Set "USB" radio button to "Modem" value. 8. Press Home button. 9. Go to dial window. 10. Enter "#9090#" number. 11. Set "Diag config" to "USB" value. 12. Restart phone. 13. Press "Read Info" in software. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM1 Selected model: SGH-T989 Phone was not found on the selected port! Searching for USB diagnostic port... Connecting to phone on COM30 Mode: Normal Phone model: AAABQOCZ Phone model is not supported Phone connection failed Connecting to phone on COM28 Mode: Normal Phone model: SGH-T989 Firmware compiled date: Jun 19 2012 Firmware compiled time: 23:00:00 Firmware released date: Jan 14 2013 Firmware released time: 19:22:01 Phone IMEI: 359858-04-XXXXXX-X SW version: M9200B-SCAQCSZD-3.4.701096 ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM28 Selected model: SGH-T989 Mode: Normal Phone model: SGH-T989 Firmware compiled date: Jun 19 2012 Firmware compiled time: 23:00:00 Firmware released date: Jan 14 2013 Firmware released time: 19:22:01 Phone IMEI: 359858-04-XXXXXX-X SW version: M9200B-SCAQCSZD-3.4.701096 Unlocking phone... Phone is successfully unlocked To finish the operation, please restart the phone via phone's menu.