View Single Post
Old 08-17-2015, 16:36   #430 (permalink)
sumatera
Freak Poster
 
sumatera's Avatar
 
Join Date: Apr 2008
Location: west java
Posts: 339
Member: 756701
Status: Offline
Sonork: 100.1592286
Thanks Meter: 91
Thumbs up P3100 aka Galaxy Tab 2

Come Dead, no boot,with jtag not done.

Done with Direct Emmc , this log

During firts read:

Code:
Z3X EasyJtag Software ver. 2.0.4.0
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N:xxxxxx, ,FW Ver.: 01.52
CMD Pullup Level:917 mV
CMD Active Level:2588 mV
eMMC Device Information
EMMC CID : 1501004D4147324741071B10087B4FB4

EMMC CSD : D02701320F5903FFF6DBFFFF8A404006

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 04/2012  Rev.0x7
EMMC NAME: <b>MAG2GA</b> , S/N:  454035579
EMMC NAME (HEX): 4D414732474100 
EMMC ROM1 (Main User Data)   Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
  Extended CSD rev 1.5 (MMC 4.41)

Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit  , Partition config [179]: 0x00.
Backup saved: MAG2GA_ 454035579_20150701_1512.extcsd
Searching for partition tables...
Detected GPT over MBR...
Warning: Header Size = 512 (expected 92)
Medium UUID: 52444E41-494F-2044-4D4D-43204449534B
Warning: Entries Count = 128
MMCBLK0P0 (EFS) Range:	[0X400000,0X17FFE00] ,Len: 1400000
MMCBLK0P1 (SBL1) Range:	[0X1800000,0X19FFE00] ,Len: 200000
MMCBLK0P2 (SBL2) Range:	[0X1A00000,0X1BFFE00] ,Len: 200000
MMCBLK0P3 (PARAM) Range:	[0X1C00000,0X23FFE00] ,Len: 800000
MMCBLK0P4 (KERNEL) Range:	[0X2400000,0X2BFFE00] ,Len: 800000
MMCBLK0P5 (RECOVERY) Range:	[0X2C00000,0X33FFE00] ,Len: 800000
MMCBLK0P6 (CACHE) Range:	[0X3400000,0X2EFFFE00] ,Len: 2BC00000
MMCBLK0P7 (MODEM) Range:	[0X2F000000,0X303FFE00] ,Len: 1400000
MMCBLK0P8 (FACTORYFS) Range:	[0X30400000,0X87BFFE00] ,Len: 57800000
MMCBLK0P9 (DATAFS) Range:	[0X87C00000,0X38B3FBA00] ,Len: 3037FBC00
MMCBLK0P10 (HIDDEN) Range:	[0X38B3FBC00,0X3AB3FBA00] ,Len: 20000000
Done...Presets has been updated...
Done.

But while write rom1, error:

Code:
Z3X EasyJtag Software ver. 2.0.4.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:917 mV
CMD Active Level:2588 mV
Input file : I:\RCP jtag file\SAMSUNG\Dump\P3100_Main_BN.bin
Writing 0010000000 bytes to 00000000 ...ROM1 (USER ROM)
Retry writing adress 0x00000000 (Attempt #1)...
Retry Fail!
Retry writing adress 0x00000000 (Attempt #2)...
Retry Fail!
Retry writing adress 0x00000000 (Attempt #3)...
Retry Fail!
Write Block Failed, Reason: OCR Ready Timeout Error [Check VCC or eMMC DEAD] 
Done.
STEP

1.Reconnect and update firmware

Code:
Z3X EasyJtag Software ver. 2.0.4.0
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 0707070F2ED2C32A, ,FW Ver.: 01.52
CMD Pullup Level:928 mV
CMD Active Level:2588 mV
Setup firmware update mode, wait 2..30 sec... 
Success!
Sending eMMC firmware...
Success!
Verifying eMMC firmware...
Success!
Flashing eMMC firmware...
Success!
Repairing eMMC CID...
Success!
<font color="green">eMMC firmware is updated now! </font>
<font color="green">Please reconnect all eMMC lines before next operation!</font>
<font color="green">Please don't forget to repair <b>extCSD</b> from backup!</font>
<font color="green">Please don't forget to configure <b>BOOT</b> sizes!</font>
Done.
2.Movinand Factory Reset

Code:
Running:SAMSUNG: MoviNAND Factory Reset...
Skip loading eMMC Addon Firmware
CMD Pullup Level:928 mV
CMD Active Level:2588 mV
Sending Smart Wipe Request...
Wiping Card... Please do not touch it!
<font color="red">Please don't forget to repair extCSD from backup!</font>
Done.
3.Movinand Reset + Format

Code:
Running:SAMSUNG: MoviNAND Reset + Format...
Z3X EasyJtag Software ver. 2.0.4.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:928 mV
CMD Active Level:2588 mV
EMMC ROM2/3 (Boot Partitions) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Sending Internal Reconfiguration Request...
Waiting configuration Apply!
Restoring configuration...
EMMC ROM2/3 (Boot Partitions) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Wiping Card... Please do not touch it!
<font color="red">Please don't forget to repair extCSD from backup!</font>
Done.
4. Repair extCSD

Code:
Running:Repair extCSD...
Z3X EasyJtag Software ver. 2.0.4.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:938 mV
CMD Active Level:2516 mV
Writing...
Done.
5. Write ROM 2(Boot Partition 1) set 2MB

Code:
Z3X EasyJtag Software ver. 2.0.4.0
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 0xxxxxxxxxxxx, ,FW Ver.: 01.52
CMD Pullup Level:917 mV
CMD Active Level:2505 mV
eMMC Device Information
EMMC CID : 1501004D414732474105C8049C3A5F36

EMMC CSD : D02701320F5903FFF6DBFFFF8A404006

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2012  Rev.0x5
EMMC NAME: <b>MAG2GA</b> , S/N: 3355745338
EMMC NAME (HEX): 4D414732474100 
EMMC ROM1 (Main User Data)   Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
  Extended CSD rev 1.5 (MMC 4.41)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM 2 (Boot Partition 1)
Boot bus config [177]: 0x00 , width 1bit  , Partition config [179]: 0x48.
Backup saved: MAG2GA_3355745338_20150701_1555.extcsd
Searching for partition tables...
Partitioning not detected...
Done.
6. Write ROM 1(USER ROM) set 512KB

Code:
Z3X EasyJtag Software ver. 2.0.4.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:917 mV
CMD Active Level:2505 mV
Input file : I:\RCP jtag file\SAMSUNG\Dump\p3100\P3100 USERAREA.bin
Writing 0010000000 bytes to 00000000 ...ROM1 (USER ROM)
Done. Write Speed: 1899 kB/s
7. Done, and device alive again

Code:
Z3X EasyJtag Software ver. 2.0.4.0
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: xxxxxxxx, ,FW Ver.: 01.52
CMD Pullup Level:917 mV
CMD Active Level:2505 mV
eMMC Device Information
EMMC CID : 1501004D414732474105C8049C3A5F36

EMMC CSD : D02701320F5903FFF6DBFFFF8A404006

EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2012  Rev.0x5
EMMC NAME: <b>MAG2GA</b> , S/N: 3355745338
EMMC NAME (HEX): 4D414732474100 
EMMC ROM1 (Main User Data)   Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
  Extended CSD rev 1.5 (MMC 4.41)

Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x00 , width 1bit  , Partition config [179]: 0x48.
Backup saved: MAG2GA_3355745338_20150701_1602.extcsd
Searching for partition tables...
Detected GPT over MBR...
Warning: Header Size = 512 (expected 92)
Medium UUID: 52444E41-494F-2044-4D4D-43204449534B
Warning: Entries Count = 128
MMCBLK0P0 (EFS) Range:	[0X400000,0X17FFE00] ,Len: 1400000
MMCBLK0P1 (SBL1) Range:	[0X1800000,0X19FFE00] ,Len: 200000
MMCBLK0P2 (SBL2) Range:	[0X1A00000,0X1BFFE00] ,Len: 200000
MMCBLK0P3 (PARAM) Range:	[0X1C00000,0X23FFE00] ,Len: 800000
MMCBLK0P4 (KERNEL) Range:	[0X2400000,0X2BFFE00] ,Len: 800000
MMCBLK0P5 (RECOVERY) Range:	[0X2C00000,0X33FFE00] ,Len: 800000
MMCBLK0P6 (CACHE) Range:	[0X3400000,0X2EFFFE00] ,Len: 2BC00000
MMCBLK0P7 (MODEM) Range:	[0X2F000000,0X303FFE00] ,Len: 1400000
MMCBLK0P8 (FACTORYFS) Range:	[0X30400000,0X87BFFE00] ,Len: 57800000
MMCBLK0P9 (DATAFS) Range:	[0X87C00000,0X1B1FFBA00] ,Len: 12A3FBC00
MMCBLK0P10 (HIDDEN) Range:	[0X1B1FFBC00,0X1D1FFBA00] ,Len: 20000000
Done...Presets has been updated...

Done.

file:

p3100_EMMC_REPAIR - Download - 4shared


BR
  Reply With Quote
The Following 4 Users Say Thank You to sumatera For This Useful Post:
Show/Hide list of the thanked
 
Page generated in 0.16809 seconds with 7 queries