08-27-2015, 18:48
|
#3157 (permalink)
|
| No Life Poster
Join Date: May 2009 Location: Bangladesh Age: 30
Posts: 888
Member: 1034743
Status: Offline Sonork: 100.1619212 Thanks Meter: 193 | Quote:
Originally Posted by miangee1978  nokia 105 flash error Code: card found: S/N 32ED:0122
registered to: usmantufail
Connect phone on selected interface...
UFS S/N 77157 boot - Ok
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Core : v2.10 , BB5XG FlashEngine : v9.9
Selected FlashSettings : FullFlash
Files Set for Flashing :
MCU : rm908_004.350
PPM : rm908_004.35md
CNT : rm9080_nai04.35md
Infineon flashing...
Booting phone now....
Sync Ok , A2
CPU ID : XGOLD , A200341100
PBL : Dynamic
Boot Ok , 01AB
SBL : Dynamic
Algo Ok , 01
SBL mode Ok
SBL : Default_RAM_Bootloader
EPP CFG [Bering]...
Error Get Flash Info! Boot failed! [0200410040001400]
- > Error booting phone...
- > Try again few times, check cable
Phone disconected!
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Read and Check phone data...
Infineon checking...
SIMLOCK TEST : Ok
RUN TEST : Ok
Booting phone now....
Sync Ok , A2
CPU ID : XGOLD , A200341100
PBL : Dynamic
Boot Ok , 01AB
SBL : Dynamic
Error booting! ALGO [SBL] not accepted!
- > Error booting phone...
Phone disconected!
Connect phone on selected interface...
Core : v2.10 , BB5XG FlashEngine : v9.9
Selected FlashSettings : Manual
Files Set for Flashing :
MCU : rm908_004.350
PPM : rm908_004.35md
CNT : rm9080_nai04.35md
Infineon flashing...
Booting phone now....
Sync Ok , A2
CPU ID : XGOLD , A200341100
PBL : Dynamic
Boot Ok , 01AB
SBL : Dynamic
Algo Ok , 01
SBL mode Ok
SBL : Default_RAM_Bootloader
EPP CFG [Bering]...
Error Get Flash Info! Boot failed! [0200410040001400]
- > Error booting phone...
- > Try again few times, check cable
Report Post Reply With Quote Multi-Quote This Message Quick reply to this message
Old 08-18-15, 10:14 #12 (permalink)
miangee1978
JUNIORMember
Join Date: Jun 2015
Location: barcelona
Posts: 14
Member: 2404482
Status: Online
Thanks Meter: 0
Send a message via MSN to miangee1978
i also try on ( UFS box )
Detected: V 03.60 11-12-13 RM-908 (c) Nokia
If used non Auto-Ignition cable, press Power-On button
IF_SBL: XGOLD110, Ok
IF_EBL: Default_RAM_Bootloader 10.24, Mode: CC
BAUD_R: 3000000
IFXFR_ERR_BAD_CMD
IFEBL_ERR_GSYS:
Process Failed, Repowering Mobile | contact my yahoo id or sonork and facebook id [email protected] |
|
|  |