Code:
For support and updates visit http://easy-jtag.com
Check security...OK
Initialising: ZTE S168 Config ver.:1.00
I/O Level set to : 2200 mV
Box S/N: 1414FD11381D35BA ,FW Ver.: 01.52
Connecting to Target...
JTAG device: QSC1110
CPU IDCODE : 0x122C80E1 Mfg.: 0x070, Part: 0x22c8, Ver.: 0x1
CPU Manufacturer: QUALCOMM , CPU Name: QSC1110 Rev 1.0
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting NOR memory parameters of bank (0) ...
NOR FlashID:0001:007E 'S29NS128J 16MB (Spansion)' found
Checking NAND Image : F:\EASY-JTAG\ZTE\S183\ZTE_S183_dump_rom1_16mb.bin
File successefuly loaded!
Writing memory from file...F:\EASY-JTAG\ZTE\S183\ZTE_S183_dump_rom1_16mb.bin
NOR Write OK! Elpsed time: 484.772736s (33.797 KiB/s)