GSM-Forum - View Single Post - please help, I can't flash nokia 105 rm-908

decodari · 09-10-2015, 07:41

Hello!

Whem I'm trying to flash nokia 105 rm-908 the flashing hangs like this:

VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done

Booting Phone...
CPU ID Response: A200341100
CPU Type: XG110 2.1B
Phone Booted at after First attempt...

************************************************** ****
TIME STARTS HERE
************************************************** ****

Sending PBL 19456 bytes...
PBL Successfully Sent...

Sending SBL 65024 bytes...
SBL Successfully Sent...
Flash Chip Manufacturer ID: 0x00C2
Flash Chip Type: 64 Mbit (4Mb x 16) NOR
Extended Information: Multi-Bank / 1.8v

Processing Image File: D:\soft\firmware\nokia\products\RM-908\rm908_02.700

Data Block Found...
Number of Sections: 03
IMAGE Certificate Block Sent Successfully...
Processing Section 01 of 03
IMAGE Erase Block: 0x00800000~0x00A0FFFE
Start Erasing...
Erasing Please Wait...

Please help!

09-10-2015, 07:41	#1 (permalink)
decodari No Life Poster Join Date: Mar 2014 Location: Romania Posts: 1,067 Member: 2157664 Status: Offline Thanks Meter: 43	please help, I can't flash nokia 105 rm-908 Hello! Whem I'm trying to flash nokia 105 rm-908 the flashing hangs like this: VBATT Powering Down <<<< VBATT Powering Up >>>> SET VCCIO Level Done SET BSI Load Done Booting Phone... CPU ID Response: A200341100 CPU Type: XG110 2.1B Phone Booted at after First attempt... ************************************************ TIME STARTS HERE ********************************************** ** Sending PBL 19456 bytes... PBL Successfully Sent... Sending SBL 65024 bytes... SBL Successfully Sent... Flash Chip Manufacturer ID: 0x00C2 Flash Chip Type: 64 Mbit (4Mb x 16) NOR Extended Information: Multi-Bank / 1.8v Processing Image File: D:\soft\firmware\nokia\products\RM-908\rm908_02.700 Data Block Found... Number of Sections: 03 IMAGE Certificate Block Sent Successfully... Processing Section 01 of 03 IMAGE Erase Block: 0x00800000~0x00A0FFFE Start Erasing... Erasing Please Wait... Please help!