Alcatel Tablet OneTouch Pixi 7 I216X Direct unlock done.. 
Selected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.6.2
Selected phone: OT-I216X
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM4)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) SAMSUNG 0x34594d443352
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 15010034594D4433 : 0000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9880000 [3.649 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM5)
Block Size: 512
MODEL FROM PROINFO: I216X-2AMVSN3-F
SECRO FROM PROINFO: X2C0DD06AU00
IMEI marker was found in nvram
IMEI[1] from NVRAM: 45f5090d0e1e56a
If this phone have OTP IMEI, this is normal.
IMEI[2] from NVRAM: 45f5090d0e1e56a
If this phone have OTP IMEI, this is normal.
Reading security, wait...
IMEI[1] : 865499022012049
SIM[1]:
Block1(N): Locked (remain:7) Code : 3363114548
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Unlocking target...please wait.
Unlock finished.
Wait untill phone will start charging.
All done.