ot 5036D Hi ser.
ALAP1
ALEG1
ALAT1
not power on phone not compatible with board
phone PROVIDER was 5036D-2AALBD1-1 I flash same provider becose it was arabic but not power on phone even thow same provider
need arabic firmware pls
here is info
Using library Brom_DLL_v7.1413.5
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (PreLoader USB VCOM Port (COM4))
Preparing to start flash mode;
Preparing to open COM4
Connecting;
Downloading DA;
Initializing;
Rid: 3a9512da41bf744ed01eaf365c901b4f
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
Switching to DA_HIGHSPEED_VCOM;
Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;
DA_HIGHSPEED_VCOM (DA USB VCOM Port)
TRYING TO OPEN COM5;
DEVICE INFO:
BB CHIP: MT6572_S00 [CA01, 00, 6572, FF]
HW_STORAGE_EMMC: 0x30000111 0x39473430 0x268E1030 0xDD32A74D [SIZE=0xEC480000]
IMEI1 [OTP 0001]: 866561-02-054104-5
IMEI2 [OTP 0001]: 866561-02-054105-2
PROVIDER: 5036D-2AALBD1-1
USRDATA INFO: 0x5C6C0000 SIZE: 0x8FDC0000
Loading the file ...
Cfg done ...
Formatting file system now...
Done;
Downloading bootloader...
Done;
Downloading images...
Done;
Success;
Time needed - 00:06:02
Log file saved to: LOG_14_12_2015_18_36_33.txt |