Welcome to Octoplus/Octopus Box Samsung software version 2.1.6
-----------------------------------------------------------------------------------
To connect SM-Z130H phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Enter "*#0808#" number.
3. Select "USB Configuration".
4. Select "USB-Phone(Modem) Chip".
5. Press Home button.
6. Enter "*#0808#" number.
7. Select "Qualcomm USB Configuration".
8. Select "USB-MTP-SDB".
9. Press Home button.
-----------------------------------------------------------------------------------
To connect GT-I8262 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect SM-J700F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-J700F
Searching for a phone. Please wait...
Please, press "OK" button on the phone to allow USB debugging..
Phone found.
Firmware compiled date: Thu Nov 5 20:43:16 KST 2015
PDA version: J700FXXU1AOK2
CSC version: J700FOJV1AOK2
SW version: J700FXXU1AOK2
Phone IMEI: Unknown
Phone SN: R28GC1BZMZX
Android version: 5.1.1 (LMY48B)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-J700F
To put SM-J700F into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Searching for a phone. Please wait...
Phone found.
Initializing..
Resetting FRP lock..success
Resetting EE lock..success
Resetting Samsung Account lock..not supported
Reset operation completed!
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-J700F
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
Phone unlocking failed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-J700F
Detected phone model: SM-J700F
Firmware compiled date: Thu Nov 5 20:43:16 KST 2015
PDA version: J700FXXU1AOK2
CSC version: J700FOJV1AOK2
SW version: J700FXXU1AOK2
Phone SN: R28GC1BZMZX
Android version: 5.1.1 (LMY48B)
Checking Root:
Phone is Rooted.
Reading security backup, please wait...
Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung
\BACKUP\Security-SM-J700F-Unknown04-01-2016_16-14-57-.asec file
Unlocking phone. This can take some time. Please wait...
Phone is successfully unlocked
To finish the operation, please restart the phone via phone's menu. |