Quote:
Originally Posted by Brka  Method #1 :
You can flash THIS pro_info, from 4030x,
just change pid to any you like. METHOD #2
Use attached scatter file, Read NVRAM first with SPFT.
Tab READ MEMORY, start address : 0x1460000 , length : 0x500000,
select file name (nvram.bin), select save location, press read and connect phone.
After, use FULL format from SPFT.
Then - Use testpoint, connect red marked point to ground,
connect phone to usb cable (I think can be flashed without battery),
flash preloader and dsp_bl, after that flash normally, without testpoint.
(TP image attached)
dram errors can come from incompatible preloader.bin and dsp_bl.
pro_info file - you can use some from sticky thread.
try and post results.
b.r.
Alex |
I read your post for same model 4030D, flash full russian firmware from your link above, phone give error on sp flash tool 3005, DRAM unknown, try method with tespoint,won't flash anything, give me same error 3005.
phone is fully bricked or is a another methot ( i don't have any gsm box ) only spflash tool.
Please help!