Nothing happens if charger is connected.
Check mechanical appearance of bottom-connector.
1. Check resistance of F200 & L202.
2. Check resistance of Vcharge-line to ground, value should be around
50kOhm.
If not ok check/change V201,C215-217, N200.
"Not charging" appears on LCD
Run energy management calibration. If it works without failuremessages, try to
charge after calibration.
Battery temperature failed :
3. Check X203, R220/222, if not OK, change CCONT N201.
Battery size failed :
4. Check X203, R220/222 or change CCONT N201.
Battery voltage failed :
5. Change CCONT N201.
Charge current failed :
6. Chaeck/change R204, N200, N201.
Charge voltage failed :
7. Check Vcharge at voltage-divider R209/210. If ok, change CCONT N201.
8. If not ok, check parts like X200, V201, F200, L202 or change N200.
