Wiko Mobile Direct Unlock done... 
Selected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.6.4
Selected phone: MT6580
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM92)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 768 MB DRAM
----------------------------------------------------
EMMC: (29Gb+6144Mb) HYNIX 0x483447326111
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 90014A48344732 : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Block Size: 512
IMEI marker was found in nvram
IMEI[1] from NVRAM: 35560107435XXXX
IMEI[2] from NVRAM: 355601074438XXX
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:5) Code : 87654321
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
SIM[2]:
Block1(N): Locked (remain:5) Code : 87654321
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Unlocking target...please wait.
Unlock finished.
Wait untill phone will start charging.
All done.