Quote:
Originally Posted by Octopus box  Please repeat "Enable DIAG" operation, then try to read phone's info from "Main" tab of the Software on different COM ports, with enabled "Manual select" option. |
It didnt work and when I go to the device manager, am not seeing the diagnostic prot only the modem port, below is log;
Welcome to Octoplus/Octopus Box Samsung software version 2.2.1
-----------------------------------------------------------------------------------
To connect SC-06D phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "UART" radio button to "PDA" value.
8. Go to "Qualcomm USB Settings".
9. Select "DM+Modem+ADB".
10. Press Home button.
11. Go to dial window.
12. Enter "*#9090#" number.
13. Set "Diag config" to "UART" value.
14. Restart phone.
15. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM13
Selected model: SM-N910V
Detected phone model: SM-N910V
Firmware compiled date: Fri Jul 31 15:49:35 KST 2015
PDA version: N910VVRU2BOG5
CSC version: N910VVZW2BOG5
SW version: N910VVRU2BOG5
Phone SN: 00000000000
Android version: 5.0.1 (LRX22C)
Updating DIAG confing...
DIAG confing is succesfully enabled.
Performed by 2.2.1 software version
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM13
Selected model: SM-N910V
Phone was not found on the selected port!
Performed by 2.2.1 software version
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM13
Selected model: SM-N910V
Detected phone model: SM-N910V
Firmware compiled date: Fri Jul 31 15:49:35 KST 2015
PDA version: N910VVRU2BOG5
CSC version: N910VVZW2BOG5
SW version: N910VVRU2BOG5
Phone SN: 00000000000
Android version: 5.0.1 (LRX22C)
Updating DIAG confing...
DIAG confing is succesfully enabled.
Performed by 2.2.1 software version
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM13
Selected model: SM-N910V
Phone was not found on the selected port!
Performed by 2.2.1 software version