| i cannot read backup from ok set
Operation : Read FullFlash [ v1.15 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 27 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC8830 Loader eMMC v1.1 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!
Phone found! [ 27 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC8830 Loader eMMC v1.1 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name : A388t
Model Brand : Lenovo
Model Device: A388t
AndrVersion : 4.1.2
BaseBand CPU: SP8830EC
Project Ver : MocorDroid4.1.2
Model Ext : Lenovo A388t
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : sc8830_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_td.bin
ReadErr : MajorErr , 0x3000:0x0000:0x00000000
ReadErr : MajorErr , 0x2000:0x0000:0x00000000
ReadErr : MajorErr , 0x1000:0x0000:0x00000000
ReadErr : FatalErr , 0x1000:0x0000:0x00000000
[Read Failed] : DataRead failed : Connection fault!
[READ_ERROR] : Connection/Battery or some unknown problem!
Reconnect Power/Cable!
Card found: S/N : 3F39398A , v0130
Chinese Miracle II [SPD module] v 1.15
Operation : Read NV [ v1.15 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 27 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC8830 Loader eMMC v1.1 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Detected eMMC Flash , Structure detect Ok!
Read NVM Part #1
Part Ok
Read NVM Part #2
Error while reading NV #4!
Reconnect Power/Cable!
set is 100% ok i need backup for other set |