Successfully flashed OT-I213 ! Using library Brom_DLL_v7.1522.2
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (PreLoader USB VCOM Port (COM28))
Preparing to start flash mode;
Preparing to open COM28
Connecting;
Downloading DA;
Initializing;
Rid: 1b60e8827251222a865102021de76574
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
Switching to DA_HIGHSPEED_VCOM;
Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;
DA_HIGHSPEED_VCOM (DA USB VCOM Port)
TRYING TO OPEN COM37;
DEVICE INFO:
BB CHIP: MT8127_S00 [CA00, 00, 8127, FF]
HW_STORAGE_EMMC: 0x34000115 0x33444D59 0x52220152 0x8B320DB6 [SIZE=0xE9880000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: I213-2BRGPL1
USRDATA INFO: 0x60F80000 SIZE: 0x66880000
Loading the file ...
Cfg done ...
Formatting file system now...
Done;
Downloading bootloader...
Done;
Downloading images...
Done;
Success;
Time needed - 00:07:32
Log file saved to: LOG_25_07_2016_12_05_32.txt
Thank you Daniel!
Last edited by ersa; 07-25-2016 at 11:51.
Reason: picture
|