[luzer]

Alcatel Pixi 4 (OT-4017a, unlisted) ...

Selected : MT6572_EMMC
Action: Security Items
Reinsert battery.
Battery must be charged.
must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM178)
detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) TOSIBA 0x303034474530
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 11010030303447 : 000000000000000000
EMMC UA SIZE: 0xec000000
STYLE: EMMC
FULL LENGTH: 0xec480000 [3.692 GB]
Status: USB_HIGH_SPEED
Not need to swith to high speed port, continue with this settings.
Dumping security....
OTP : 014590000957542
Dumping Preloader.
Dumping PRELOADER RAW.
Reading: BEGIN: 0x0 - LEN: 0x1000000
Dumping proinfo.
Reading: BEGIN: 0x1100000 - LEN: 0x200
Dumping NVRAM.
Dumping PROTECT_F
Reading: BEGIN: 0x1900000 - LEN: 0xa00000
Dumping PROTECT_S
Reading: BEGIN: 0x2300000 - LEN: 0xa00000
Dumping SECCFG.
Reading: BEGIN: 0x2d00000 - LEN: 0x20000
Dumping SEC_RO.
Dumping frp.
Reading: BEGIN: 0x4200000 - LEN: 0x200
Saved to : C:\-\Android_MTK\security_backup\MT6572_S00_EMMC_-_07_25_2016_19_15_46
Wait untill will charging.
All done.

Wrong code readed ...

Battery must be charged.
must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM178)
detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) TOSIBA 0x303034474530
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 11010030303447 : 000000000000000000
EMMC UA SIZE: 0xec000000
STYLE: EMMC
FULL LENGTH: 0xec480000 [3.692 GB]
Status: USB_HIGH_SPEED
Not need to swith to high speed port, continue with this settings.
OTP : 01459000-------
MODEL FROM PROINFO: 4017A-2AAVGT1
SECRO FROM PROINFO: LBL1NQS1AZ10
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:10) : 51741789
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Please , some firmwares can display wrong codes.
Some firmwares can be hardlocked.
If this happen, perform direct .
If direct fail,use reset package from support.
If reset package not exist in support,request help in .
Wait untill will charging.
All done.

Direct unlock failed ...

Selected connection metod: META Mode
Exe version: NCKDongle AndroidMTK 2.5.6.8
Selected model: MT6572_EMMC
Action:
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Curent Platform: MT6572
must be off with battery inside.
Please insert USB cable now...
[178]Detected: PreLoader USB VCOM Port (COM178)
\\?\usb#vid_0e8d&pid_2000#5&34b1332a&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[216]META Port Detected: Gadget CDC VCOM Driver (COM216)
USB\VID_0E8D&PID_2007\5&34B1332A&0&3
sync target, waiting responce.....
BaseBand CPU : mt6572,S01
APP_VER: ALPS.L1.MP6.V1_JHZZ6572.WET.L_P39
BaseBand CPU : MT6572, E01
SW_VER : MOLY.WR8.W1449.MD.WG.MP.V5.P6
HW_VER : JHZZ6572_WET_L_HSPA_HW
[1] : 01459000-------
[2] : 000000000000000
direct [SIM1]
Error read info[wr0]!!
direct [SIM2]
Error read info[wr0]!!
All done.