| 1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.
Interface Reset OK!
eMMC Access Type: SECTOR MODE
eMMC Supported Voltage Range:
3.5-3.6V, 3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V
3.0-3.1V, 2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V
CID : 150100513331334D420006F6DCC99241
CSD : D02701320F5903FFF6DBFFEF8E40400D
eMMC Boot Information
Revision 1.7 (for MMC v5.0, v5.01)
BOOT PARTITION : NOT BOOT ENABLED
PARTITION ACCESS : R/W USER PARTITION
PERM_BOOT_CFG_PROT : DISABLED
PWR_BOOT_CFG_PROT : DISABLED
BOOT MODE : x1 SINGLE DATA RATE + LOW SPEED
RESET BUS WIDTH : ENABLED
eMMC FirmW UPDATE : DISABLED
EMMC CACHE SIZE : 0 KB
SUPER PAGE SIZE : 3584 KB
HC ERASE GROUP SIZE: 512 KB
USER AREA SIZE : 15758000128 BYTES
BOOT PARTITION SIZE: 4096 KB
RPMB PARTITION SIZE: 4096 KB
eMMC Device Information
Manufacturer ID: SAMSUNG
Device Type : Embedded BGA
Application ID : 00
Product Name : Q313MB
Product Rev : 0.0
Product SN : 06F6DCC9
Manufactured : January 1999
Card Specific Data
CSD_STRUCTURE : Extended
SPEC_VERS : Version 4.1/4.2/4.3
TAAC : 13 ns
TRAN_SPEED : 4000000 KHz
READ_BL_LEN : 512 Bytes
C_SIZE : HIGH CAPACITY
WP_GRP_ENABLE : YES
WRITE_BL_LEN : 512 Bytes
CONTENT_PROT_APP : NO
PERM_WRITE_PROTECT: NO
TMP_WRITE_PROTECT : NO
Extended CSD Saved:
150100513331334D420006F6DCC99241.ext_csd
Backup Directory:
C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\
Start Writing Flash Images...
Flash Image: aboot.mbn
Start Writing 0x00001000 Blocks at 0x000267C0
Partition Selected: USER AREA
Total Elapsed Time 00:00:04
Write Success!
Flash Image: sbl1.mbn
Start Writing 0x00000400 Blocks at 0x00026380
Partition Selected: USER AREA
Total Elapsed Time 00:00:01
Write Success!
Flash Image: rpm.mbn
Start Writing 0x00000400 Blocks at 0x000277C0
Partition Selected: USER AREA
Total Elapsed Time 00:00:01
Write Success!
Flash Image: tz.mbn
Start Writing 0x00000400 Blocks at 0x00027BC0
Partition Selected: USER AREA
Total Elapsed Time 00:00:01
Write Success!
Flash Image: hyp.mbn
Start Writing 0x00000400 Blocks at 0x00027FC0
Partition Selected: USER AREA
Total Elapsed Time 00:00:01
Write Success!
Total Images Written: 5
Process Done!
After proces phone asks RELINK HS-USB QDLoader 9008.Phone no enter dowload mode. |