Alcatel OneTouch Pixi4 Direct Unlock done.. 
Selected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.7.2
Selected model: OT-5010X
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM92)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x463732324d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010046373232 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM98)
OTP IMEI: 357651070327910
MODEL FROM PROINFO: 5010X-2AVRGB1
SECRO FROM PROINFO: L5E2CDE3BS10
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:7) Code : 0906023597688542
Block2(NS): Unlocked
Block3(SP): Locked (remain:10) Code : 5269040028159001
Block4(C): Unlocked
Please note, some firmwares can display wrong codes.
Some firmwares can be hardlocked.
If this happen, perform direct unlock.
If direct unlock fail,use reset package from support.
If reset package not exist in support,request help in forum.
Wait untill phone will start charging.
All done.