GSM-Forum - View Single Post - Alcatel OT-8050D PIXI 4 6 Flashing Failed

Gubby_J · 10-06-2016, 12:35

Cannot flash checked with 2 versions from support, have ram and free spahe on hdd, but result is this error:

sing library Brom_DLL_v7.1522.2
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (PreLoader USB VCOM Port (COM4))
Preparing to start flash mode;
Preparing to open COM4
Connecting;
Downloading DA;
Initializing;
Rid: 287d331b66292bff63c33df8d1cf2f8b
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (DA USB VCOM Port)
TRYING TO OPEN COM16;
DEVICE INFO:
BB CHIP: MT6580_S00 [CA00, 00, 6580, FF]
HW_STORAGE_EMMC: 0x30000111 0x37473830 0xCE640030 0x53C2B92F [SIZE=0x1D2C00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: 8050D-2BALWE1
USRDATA INFO: 0xB9800000 SIZE: 0x19400000

Loading the file ...
Cfg done ...
ERROR: S_NOT_ENOUGH_MEMORY

Time needed - 00:00:30

Log file saved to: LOG_6_10_2016_14_29_18.txt

What must i do to flash this phone?

10-06-2016, 12:35	#1 (permalink)
Gubby_J Freak Poster Join Date: Mar 2005 Location: Bulgaria,Veliko Tarnovo Posts: 432 Member: 131788 Status: Offline Thanks Meter: 69	Alcatel OT-8050D PIXI 4 6 Flashing Failed Cannot flash checked with 2 versions from support, have ram and free spahe on hdd, but result is this error: sing library Brom_DLL_v7.1522.2 Searching phone in normal mode; [connect the phone powered off to the usb cable] Phone detected (PreLoader USB VCOM Port (COM4)) Preparing to start flash mode; Preparing to open COM4 Connecting; Downloading DA; Initializing; Rid: 287d331b66292bff63c33df8d1cf2f8b Requesting baudrate change; Done; USB SPEED: USB_HIGH_SPEED Switching to DA_HIGHSPEED_VCOM; Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86; If the detection fails, install manually the port from the device manager using usbvcom.inf; DA_HIGHSPEED_VCOM (DA USB VCOM Port) TRYING TO OPEN COM16; DEVICE INFO: BB CHIP: MT6580_S00 [CA00, 00, 6580, FF] HW_STORAGE_EMMC: 0x30000111 0x37473830 0xCE640030 0x53C2B92F [SIZE=0x1D2C00000] IMEI1 [OTP 0000]: 000000-00-000000-0 IMEI2 [OTP 0000]: 000000-00-000000-0 PROVIDER: 8050D-2BALWE1 USRDATA INFO: 0xB9800000 SIZE: 0x19400000 Loading the file ... Cfg done ... ERROR: S_NOT_ENOUGH_MEMORY Time needed - 00:00:30 Log file saved to: LOG_6_10_2016_14_29_18.txt What must i do to flash this phone?