lumia 640 sx4 Hey Team, i try to unlock my nokia lumia 640, it gives me an error message that i don't really understand, but when i check my IOS account it show unlock done, but phone still lock, i send a message through the ios, you ask me to send message on forum, this is the error message, Phone not in service mode!
Set phone to Test mode first!
[WP8x] : Init TesMode
[TSTM] : Use File : RM1074_2179.0000.9651.15153.207.749_enosw-wim-signed_858223.secwim
=== Base Phone Info
Sw Version : 02177.00000.15184.36003
IMEI : 358606062248762
ProductCode : 059X192
Device catched in BOOT mode!
Collect Info...
=== Nokia Flash App info :
Protocol Version : 2.37
Protocol Implementation : 2.60
=== Phone Initial info :
Phone Model ID : Nokia.MSM8926.P6204.1.1
=== eMMC info :
eMMC Vendor : Toshiba
eMMC CID : 0011
eMMC Size : 7456 MiB
=== Security Initial info :
Security Status : 010100000101
Secure Boot : Enabled
Secure eFUSE : Enabled
JTAG : Disabled
RDC Key : Not Present (Retail)
UEFI SBoot : Enabled
SecHW Key : Exists
Device RootKey : 831BE6B18E7006372069545885A80F786C33D064
=== Other info :
SD present : False
SECWIM : RM1074_2179.0000.9651.15153.207.749_enosw-wim-signed_858223.secwim
Sending WIM ...
WIM Image sent! Trying init TestMode now...
Connect phone on selected interface...
Phone found!
WP10/WP8x Lumia Phone detected
Read info... Ok
WP8 Unlock Started
Connecting to server...
Connected
Authenticating...
Authenticated
Checking Client version...
Client version is valid
Processing Step #1
Processing Step #2
Processing Step #3
Processing Step #4
Disconnected
Need SDAuth to finish ...
Started
Connecting to SX4 server...
Connection faled: Socket Error # 10060
Connection timed out.
SX4 Disconnected
SX4 Failed, will retry Auth again ...
Started
Connecting to SX4 server...
Connection faled: Socket Error # 10060
Connection timed out.
SX4 Disconnected
SDAuth not done! Try make SX4 after 1-2 minute and make "Unlock" again!
Error! Check previous error message for more info!
SD Authentification : not done
Local SX4 Card Not Found, wil use Server
Started
Connecting to SX4 server...
Connection faled: Socket Error # 10060
Connection timed out.
SX4 Disconnected
Error while operation, check previous message for more info
Thanks. |