| Mtn..steppa 2 lte..done
READ FLASH AND WRITE FLASH DONE..
Operation : Read Flash [ v1.04 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 0090E404
ID_BLOCK_I : 007050E1
ID_BLOCK_L : 5BF3348E79A4C3B7
ID_BLOCK_L : C060A78CD1F7F27B
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000000E9000000 [ eMMC 4 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000
Boot Ok!
Brand : MTN
ProdName : Steppa2
ProdModel : MTN Steppa 2 LTE
Device : Steppa2
AndroidVer: 4.4.4
Manufact. : MTN
QLMxCPU : MSM8916
QLMxPRJ : TBW572513_9752_V020101_20150304-2358
DevInfo : MSM8916__MTN__MTN__ANDR_v4.4.4__MTN_Steppa_2_LTE__ Steppa2__Steppa2__TBW572513_9752_V020101_20150304-2358
Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : splash.img
[Read Ok] : sec.dat
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin
Android Info saved!
Read finished!
Configuration : MSM8916 / eMMC
Firmware Size : 856 MiB
Done!
Elapsed: 00:02:11
Reconnect Power/Cable!
Loading firmware ...
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : MTN
Device Manufact.: MTN
Device Model : Steppa2
Device CPU : MSM8916
Device IntName : Steppa2
Device Version : 4.4.4
CU_SWVer : MTN
Device Compile : 2015/03/04 03:58:18 PM
Device Project : TBW572513_9752_V020101_20150304-2358
Device ExtInfo : MTN Steppa 2 LTE
Load Ok!
Operation : Flash [ v1.04 ]
Verify FW package ...
Verification passed!
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 09F514CF
ID_BLOCK_I : 007050E1
ID_BLOCK_L : 5BF3348E6F08B362
ID_BLOCK_L : C060A78CC75B82AE
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000000E9000000 [ eMMC 4 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000
Boot Ok!
Files in Chain : 23
Flashing now
Flashing : gpt_main0.bin
Flashing : NON-HLOS.bin
Flashing : sbl1.mbn
Flashing : sbl1.mbn
Flashing : emmc_appsboot.mbn
Flashing : emmc_appsboot.mbn
Flashing : rpm.mbn
Flashing : rpm.mbn
Flashing : tz.mbn
Flashing : tz.mbn
Flashing : hyp.mbn
Flashing : hyp.mbn
Flashing : splash.img
Flashing : sec.dat
Flashing : boot.img
Flashing : system.img
Flashing : persist.img
Flashing : cache.img
Flashing : recovery.img
Flashing : userdata.img
Flashing : gpt_backup0.bin
Boot settings configured!
Flashing done!
Done!
Elapsed: 00:04:00
Reconnect Power/Cable! |