[swapan]

Gionee P3 MT6582
Virus Remove Done With Flash

 Flash files count is :15
 Action : Firmware update.
 Selected Model: 0-By CPU: MT6582
 Exe version: NCKBox AndroidMTK 1.8.7.3
 Scenario: [0]Safe Flash
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : PreLoader USB VCOM Port (COM10)
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6582_S01
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
----------------------------------------------------
 EMMC: (29Gb+4096Mb) SAMSUNG 0x4e35585a4d42 
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 1501004E35585A : 000000000000000000
 EMMC UA SIZE: 0xe9000000      
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9880000       [3.649 GB]
 Preloader SEC version: 2
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detecting high speed port, wait......
 Detected : DA USB VCOM Port (COM13)
 Warning, flashing preloader disabled! 
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader saved in firmware directory.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.

=========================
BR.
SWAPAN