hang on logo
flashing log
Code:
Operation : Flash
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM146)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.1.2
Connecting to phone... OK
Waiting for response... OK
Init Handshake Sequence... OK
Hardware ID : E1809100 [8x10] [00000000]
Initializing Protocol... OK
Preparing Firehose Loader... Done
Sending Firehose Loader... Done
Executing Loader... OK
Hardware : 8x10, eMMC, 8 GB
Warning! High Speed Driver not installed.
Please install driver from QcFire\Drivers folder.
Payload Info : In: 65536 [4096], Out: 49152, Sector Size: 512
Writing sbl1.mbn ... Done
Writing rpm.mbn ... Done
Writing tz.mbn ... Done
Writing emmc_appsboot.mbn ... Done
Writing dummy.img ... Done
Writing dummy.img ... Done
Writing boot.img ... Done
Writing recovery.img ... Done
Writing persist.img ... Done
Writing NON-HLOS.bin ... Done
Writing system.img ... Done
Writing cache.img ... Done
Writing userdata.img ... Failed Failed
Operation Finished.
now cell is complete dead
not even detecting in edl mode also
kindly assit
regards!