[fokal2008]

HTC DESIRE 630 CLONE FLASHING DONE

 Action : Boot Info.
 Selected 0-By CPU:MT6572_EMMC
 Exe version: NCKBox AndroidMTK 1.8.7.6
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM148)
 Boot mode: Preloader
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6572_S00
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
----------------------------------------------------
 EMMC: (29Gb+4096Mb) TOSIBA 0x303034473930 
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: 11010030303447 : 000000000000000000
 EMMC UA SIZE: 0xec000000      
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xec480000       [3.692 GB]
 Preloader SEC version: 2
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detecting high speed port, wait......
 Detected : MediaTek DA USB VCOM (Android) (COM147)
 Build ID: KOT49H
 Display ID: ALPS.KK1.MP6.V1
 Version: 4.4.2
 Build Date: Wed Oct 19 12:37:31 CST 2016
 Build Date: 1476851851
 Model: G3
 Brand: alps
 Device: rtech72_we_72_kk
 Manufacturer: alps
 Region: US
 Mediatek Version Release: ALPS.KK1.MP6.V1
 [0]Warning, nvram posible damaged!!.
 Wait untill phone will start charging.
 All done.


 Flash files count is :12
 Action : Firmware update.
 Selected Model: 0-By CPU: MT6572_EMMC
 Exe version: NCKBox AndroidMTK 1.8.7.6
 Scenario: [1]Full Flash
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : MediaTek USB Port (COM163)
 Boot mode: Brom
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6572_S00
 BaseBand CPU Secure Version : 05
 BaseBand CPU Bootloader Version : 00
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
----------------------------------------------------
 EMMC: (29Gb+4096Mb) TOSIBA 0x303034473930 
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: 11010030303447 : 000000000000000000
 EMMC UA SIZE: 0xec000000      
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xec480000       [3.692 GB]
 Preloader SEC version: 2
 Status: USB_FULL_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detecting high speed port, wait......
 Detected : MediaTek DA USB VCOM (Android) (COM147)
 Flash EMMC Algo Start.
 Preloader backup already exist, skip saving.
 Starting flash.
 FORMAT EMMC FLASH :  BEGIN: 0x39f40000       - LEN: 0xe200000       
 FORMAT EMMC FLASH :  BEGIN: 0x48140000       - LEN: 0xa2e40000      
 Send preloader...
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.