HERE LOG
i hve 4 set faulty try flash it got this errore
PHP Code:
Wait for phone...
Device not found!
Check cable, connection and drivers!
Reconnect Power/Cable!
Operation : Reset Settings [ v1.10 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device not found!
Check cable, connection and drivers!
Reconnect Power/Cable!
Operation : Reset Settings [ v1.10 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device not found!
Check cable, connection and drivers!
Reconnect Power/Cable!
Operation : Reset Settings [ v1.10 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device not found!
Check cable, connection and drivers!
Reconnect Power/Cable!
Operation : Reset Settings [ v1.10 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x10]
ID_BLOCK_S : 05580BC2
ID_BLOCK_I : 008110E1
ID_BLOCK_L : C7215BA3129885807FD43C21EEB53D0D
ID_BLOCK_L : 3342CC5F50C36BF81DD8BD6A78B7A1AA
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000
Boot Ok!
Format USER ...
Format CACHE ...
Format Ok!
Done!
Elapsed: 00:00:24
Reconnect Power/Cable!
Loading firmware ...
Created by Infinity-Box (c) Chinese Miracle II (c) 2017
Device Brand : MTN
Device Manufact.: MTN
Device Model : MTN-TBW5982C3
Device CPU : MSM8610
Device IntName : MTN-TBW5982C3
Device Version : 4.3
CU_SWVer : MTN
Device Compile : 8/22/2014 1:50:23 PM
Device Project : TBW598213_9423_V016018
Device ExtInfo : MTN-TBW5982C3
Load Ok!
Operation : Flash [ v1.10 ]
ForceFlashing : Disabled
Verify FW package ...
Verification passed!
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x10]
ID_BLOCK_S : 05580BC2
ID_BLOCK_I : 008110E1
ID_BLOCK_L : C7215BA3129885807FD43C21EEB53D0D
ID_BLOCK_L : 3342CC5F50C36BF81DD8BD6A78B7A1AA
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000
Boot Ok!
Files in Chain : 20
Flashing now
Flashing : gpt_main0.bin
Flashing : NON-HLOS.bin
Flashing : sbl1.mbn
Flashing : deploy.mbn
Flashing : emmc_appsboot.mbn
Flashing : rpm.mbn
Flashing : boot.img
Flashing : tz.mbn
Flashing : system.img
Flashing : persist.img
Flashing : cache.img
Flashing : recovery.img
Flashing : misc.img
Flashing : splash.img
Flashing : prjconfig.mbn
Flashing : usbdisk.img
Flashing : userdata.img
Flashing : gpt_backup0.bin
ProgStart : start 7733215, num 33
ProgFinish : Write failed Sector 7733215, Errno 14
Flash Error , Wrong ACK message! Bad File or eMMC fault?
Error : Flashing failed!
Check previous message for more info!