medusa pro box jtag port is rj48 port or jtag 20pin male port???
i ma using old medus suite with new medusa pro box to repair gt-i9192 with jtag conection using 20 pint jtag conecter.but it fails.will i use rj-48 for old medusa suite?????
Code:
Welcome to Medusa Box Software version 2.6.1.1
Selected device model: Samsung GT-I9192
Connecting. Please wait...
Checking data...
VREF = 0.0V is less than required level. Please check target device power supply.
ERROR[035]: Target device has been powered off during connect.
Please connect the target device and power it on...
Checking data...
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.15.
Detected TAP ID: 4BA00477, IR Length = 2.
Detected TAP ID: 308A30E1, IR Length = 0.
Medusa JTAG Firmware version 1.15.
ERROR[032]: Target device Core has disabled JTAG/EmbeddedICE.
JTAG speed : Auto (RTCK).
VREF level : 1.77 V
CPU : Qualcomm MSM8930AB
Core ID : 308A30E1
ERROR[004]: Medusa Device Server did not replied to HELLO command.
Selected device model: Samsung GT-I9192
Connecting. Please wait...
Checking data...
VREF = 0.77V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.15.
Detected TAP ID: 89B020E1, IR Length = 11.
ERROR[010]: Unsupported device CPU. Core ID = 89B020E1.
Please connect the target device and power it on...
Checking data...
VREF = 0.73V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.15.
ERROR[030]: TDO is constant high. Please check target device connection.
MI: Medusa JTAG init failed.
Checking data...
Medusa JTAG Firmware version 1.15.
Detected TAP ID: 89B020E1, IR Length = 11.
ERROR[010]: Unsupported device CPU. Core ID = 89B020E1.
Checking data...
VREF = 0.74V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.15.
Detected TAP ID: 89B020E1, IR Length = 11.
ERROR[010]: Unsupported device CPU. Core ID = 89B020E1.
Please connect the target device and power it on...
Checking data...
Medusa JTAG Firmware version 1.15.
MI: Medusa JTAG init failed.
Checking data...
Medusa JTAG Firmware version 1.15.
ERROR[030]: TDO is constant high. Please check target device connection.
MI: Medusa JTAG init failed.
Checking data...
VREF = 0.73V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.15.
MI: Medusa JTAG init failed.
Please connect the target device and power it on...
Checking data...
VREF = 0.85V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.15.
MI: Medusa JTAG init failed.
Checking data...
Medusa JTAG Firmware version 1.15.
MI: Medusa JTAG init failed.