Karbonn Aura Power 4G SC9630 Test Report. Operation : Check/Read Info [ v1.24 ] Code:
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 11 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FLASH : eMMC Flash , Structure : Ok!
Reading extended info ...
Model Name : sp9832a_2h11_4mvoltesea
Model Brand : Karbonn
Model Device: sp9832a_2h11_volte
AndrVersion : 6.0
BaseBand CPU: SP9832A_2H11_VOLTE
CompileDate : 1/5/2017 1:51:09 AM
Project Ver : UTLAura_Power_4Gv1004_05012017
Model Ext : Karbonn Aura Power 4G
ExtraInfo : HWInfo exists!!! This phone have DYNAMIC HW settings!!!
Elapsed: 00:00:20
Reconnect Power/Cable!
Operation : Check/Read Info [ v1.24 ] Code:
1. Remove battery. Insert battery back
2. Insert cable
3. In case of SVC init problems - connect with hold "VolDown" button!
==== Wait for phone...
Phone found! [ 10 ]
Port Opened
Sync...
Normal Mode init
Sync...
Phone Initial Info :
Platform : MOCORTM_15C_W16.39.3_P3.03_Debug
Project : sharkl_cp1
HWInfo : sc9630_modem
Phone Security Info :
IMEI [1] : 6007384XXXXXXXX
IMEI [2] : 6007384XXXXXXXX
BT_ADDR : 000000000000
SelfInfo :
BatVoltage : 3.782 V
Done
Reconnect Power/Cable!
Operation : Read FullFlash [ v1.24 ] Code:
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 11 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
- > Wait phone connected ...
Phone found! [ 11 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
- > Wait phone connected ...
Phone found! [ 11 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name : sp9832a_2h11_4mvoltesea
Model Brand : Karbonn
Model Device: sp9832a_2h11_volte
AndrVersion : 6.0
BaseBand CPU: SP9832A_2H11_VOLTE
Project Ver : UTLAura_Power_4Gv1004_05012017
Model Ext : Karbonn Aura Power 4G
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_l.bin
[Read Ok] : sharkl_cp1.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : l__WPH_arm7.bin
[Read Ok] : PM_arm7_sys.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : fblogo_720x1280.bin
[Read Ok] : wcn_fdl.bin
[Read Ok] : AA_MARLIN.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : udc_config.bin
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 2648 MiB
Saved to : C:\InfinityBox\CM2SPD\Flash\SP9832A_2H11_VOLTE_sp9832a_2h11_volte_6.0_UTLAura_Power_4Gv1004_05012017_Karbonn_Aura_Power_4G\
Done!
Elapsed: 00:17:45
Reconnect Power/Cable!