[jmr]

G530H repair boot ok

Welcome to Medusa Pro Software version 1.3.4.
Started.
Reader #0: FT SCR2000 0
Reader #1: FT SCR2000 1
Reader #2: Generic EMV Smartcard Reader 0
Downloaded and installed file C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G530H_EMMC_P1J95K.srf.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-G530H
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G530H_EMMC_P1J95K.srf
Voltage : 2.0V
Bus Mode : 1
Bus speed : Auto

Connecting...
Device : Micron eMMC P1J95K
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB
---------------------------------------------------------------
CID Info

CID : FE014E50314A39354B13317EA2E6421F
Manufacturer ID : 0XFE
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4E
Product name : P1J95K
Product revision : 1.3
Product serial number : (hex) 317EA2E6
Manufacturing date : 04/2015
---------------------------------------------------------------
CSD Info

CSD : D06E01320F5913FFFFFFFFEF92400071
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 6 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 8192 Kbytes
Boot1 size : 2048 Kbytes
Boot2 size : 2048 Kbytes
RPMB size : 2048 Kbytes

Partition config : 00000000
Boot partition enable : Device not boot enabled (default) (Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/P1J95K_01_04_2017_22_36_42.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.3.4; FW: 1.15.
P00: GPT (00000000, 00002000)
P01: apnhlos (00002000, 00007800)
P02: modem (00009800, 0001CB80)
P03: sbl1 (00026380, 00000400)
P04: ddr (00026780, 00000040)
P05: aboot (000267C0, 00001000)
P06: rpm (000277C0, 00000400)
P07: qsee (00027BC0, 00000400)
P08: qhee (00027FC0, 00000400)
P09: fsg (000283C0, 00001800)
P10: sec (00029BC0, 00000020)
P11: pad (00029BE0, 00005420)
P12: param (0002F000, 00005000)
P13: efs (00034000, 00007000)
P14: modemst1 (0003B000, 00001800)
P15: modemst2 (0003C800, 00001800)
P16: boot (0003E000, 00006800)
P17: recovery (00044800, 00007800)
P18: fota (0004C000, 00002802)
P19: backup (0004E802, 000037EE)
P20: fsc (00051FF0, 00001800)
P21: ssd (000537F0, 00000010)
P22: persist (00053800, 00004000)
P23: persdata (00057800, 00004800)
P24: system (0005C000, 002EC000)
P25: cache (00348000, 00096000)
P26: hidden (003DE000, 00005000)
P27: userdata (003E3000, 00AACFD8)
Reapairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G530H_EMMC_P1J95K.srf".
Write data verification is enabled.
Writing GPT partition... Done.
Writing apnhlos partition... Done.
Writing sbl1 partition... Done.
Writing aboot partition... Done.
Writing rpm partition... Done.
Writing qsee partition... Done.
Writing qhee partition... Done.
Writing boot partition... Done.

Smart Repair is successfully complete.
SW: 1.3.4; FW: 1.15.
Disconnected.