| z3x easy jtag Can't init device, Reason: CMD Timeout Error
Z3X EasyJtag Software ver. 2.5.0.8
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: xxxxxxxxxxxxxxx, ,FW Ver.: 01.58
CMD Pullup Level:670 mV
CMD Active Level:1794 mV
Box IO Level:1850 mV
CLK Rate:21000 khz
HiPower mode is ON!
Can't init device, Reason: CMD Timeout Error
Done.
whats the solution |