[rea1One]

eMMC_tool Suite ver. 1.0.0.46
Microsoft Windows 7 (32 bit) build 7600 (6.1.7600.16385)

Looking for EasyJTAG box...
EasyJTAG API ver. 2008
Setting IO Levels to 2.8V
Setting frequence to 21 Mhz
HiPower mode is OFF
EasyJTAG Box Serial = xxxxxxxxxxxxxxxx
Card Serial = xxxxxxxx
EasyJTAG Box Firmware = 01.58

Changelog:

16.05.2017 (ver 1.0.0.46)
Fix: Bugs that have been found through your crash report
Add: Scanning PIT from eMMC (Explorer)
Add: Scanning from MassStorage (E-MATE / KET / QC_9006)
01.05.2017 (ver 1.0.0.45)
Fix: Bugs that have been found through your crash report
Add: eMMC chip name identification from cid (Preloader parser)

HiPower mode is OFF
CMD Pullup Level: 1763 mV
CMD Active Level: 2299 mV
EMMC Device Information :
EMMC CID: 90014A4838473475920107A67509241E
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX
EMMC NAME: H8G4u , S/N: 07A67509 , rev. 01
EMMC NAME (HEX): 483847347592
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
Backup saved: H8G4u_07A67509_20170522_123810.extcsd
EMMC Init completed.

Opening file: PIT-SM-G532G-15-03-2017_09-07-10.pit

Pit: PIT-SM-G532G-15-03-2017_09-07-10.pit
Entry count: 58172624

The size of the last section has been updated

BL_G532GDXU1AQC1_CL10833492_QB12769600_REV00_user_ low_ship_MULTI_CERT.tar.md5
The list of files in the firmware:
preloader.img
lk.bin
param.bin
trustzone.bin
efuse.img

HiPower mode is OFF
CMD Pullup Level: 1773 mV
CMD Active Level: 2310 mV
EMMC Device Information :
EMMC CID: 90014A4838473475920107A67509241E
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture Name: SKHYNIX
EMMC NAME: H8G4u , S/N: 07A67509 , rev. 01
EMMC NAME (HEX): 483847347592
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
Backup saved: H8G4u_07A67509_20170522_123820.extcsd
EMMC Init completed.

Operation: Write by vendor (Samsung)

Creating GPT-partitioninig
Writing PIT at address: 000000004400
GPT-partitioning done

Unpacking file: preloader.img
Unpacking file: lk.bin
Unpacking file: efuse.img
Unpacking file: trustzone.bin
Unpacking file: param.bin

Partition name: BOOTLOADER
Filename: preloader.img , Offset: 000000000000 , filesize: 170240 bytes
eMMC switching to ROM2
Erasing partition...
Writing partition...
Done writing partition. Write speed: 293.04 Kb/s
Partition name: LK
Filename: lk.bin , Offset: 000001000000 , filesize: 590336 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 806.07 Kb/s
Partition name: EFUSE
Filename: efuse.img , Offset: 000001B80000 , filesize: 768 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 45.21 Kb/s
Partition name: TEE1
Filename: trustzone.bin , Offset: 000001C00000 , filesize: 324352 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 881.74 Kb/s
Partition name: PARAM
Filename: param.bin , Offset: 000005000000 , filesize: 747520 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 836.05 Kb/s

All done

phone still dead, only detect as MTK usb