GSM-Forum - View Single Post

maanarman · 05-24-2017, 11:16

Welcome to Medusa Pro Software version 1.3.6.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Reader #2: FT SCR2000 1

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1
Bus speed : Auto

Connecting...
Device : Samsung eMMC FJ27MB
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info

CID : 150100464A32374D42021933D6D59263
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : FJ27MB
Product revision : 0.2
Product serial number : (hex) 1933D6D5
Manufacturing date : 09/2015
---------------------------------------------------------------
CSD Info

CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes

Partition config : 01001000
Boot partition enable : Boot partition 1 (Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit

Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1908736 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/FJ27MB_23_05_2017_15_36_14.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.3.6; FW: 1.16.
P00: GPT (00000000, 00000400)
P01: proinfo (00000400, 00001800)
P02: nvram (00001C00, 00002800)
P03: protect1 (00004400, 00005000)
P04: protect2 (00009400, 00005000)
P05: seccfg (0000E400, 00000200)
P06: lk (0000E600, 00000300)
P07: boot (0000E900, 00008000)
P08: recovery (00016900, 00008000)
P09: para (0001E900, 00000400)
P10: logo (0001ED00, 00004000)
P11: expdb (00022D00, 00005000)
P12: frp (00027D00, 00000800)
P13: nvdata (00028500, 00010000)
P14: metadata (00038500, 00013B00)
P15: oemkeystore (0004C000, 00001000)
P16: secro (0004D000, 00003000)
P17: keystore (00050000, 00004000)
P18: system (00054000, 0026C000)
P19: cache (002C0000, 00040000)
P20: userdata (00300000, 0043FC00)
P21: flashinfo (0073FC00, 00008000)

---------------------------------------------------------------
Selected scatter file: F:/CHINA/Q MOBILE FF/I6i Q MOBILE MT6580__QMobile__QMobile i6i__QMobile__5.1__ALPS.L1.MP6.V2_TINNO6580.WE.L/I6i Q MOBILE MT6580__QMobile__QMobile i6i__QMobile__5.1__ALPS.L1.MP6.V2_TINNO6580.WE.L/MT6580_Android_scatter.txt.
Scatter file type 2.
Opened input file: F:/CHINA/Q MOBILE FF/I6i Q MOBILE MT6580__QMobile__QMobile i6i__QMobile__5.1__ALPS.L1.MP6.V2_TINNO6580.WE.L/I6i Q MOBILE MT6580__QMobile__QMobile i6i__QMobile__5.1__ALPS.L1.MP6.V2_TINNO6580.WE.L/preloader_s5030.bin

Found 2 eMMC supported CID:

eMMC Vendor ID : 90 (Hynix eMMC)
eMMC Model ID : 4A01
eMMC Name : H8G1e
eMMC CID : 90014A483847316505

eMMC Vendor ID : 15 (Samsung eMMC)
eMMC Model ID : 0001
eMMC Name : FJ27MB
eMMC CID : 150100464A32374D42

Writing. Please wait...
Writing partition preloader... Write data verification is enabled.
Write data verification is enabled.
Done.
Writing partition lk... Write data verification is disabled.
Done.
Writing partition boot... Write data verification is disabled.
Done.
Writing partition recovery... Write data verification is disabled.
Done.
Writing partition logo... Write data verification is disabled.
Done.
Writing partition secro... Write data verification is disabled.
Done.
Writing partition cache... Write data verification is disabled.
Done.
Writing checksums...Done.
Writing finished.
SW: 1.3.6; FW: 1.16.

05-24-2017, 11:16	#810 (permalink)
maanarman No Life Poster Join Date: Jan 2008 Location: PAKISTAN KARACHI Age: 44 Posts: 12,919 Member: 686395 Status: Offline Sonork: 100.1608345 Thanks Meter: 3,822	Qmobile i6i Boot Repair Done Welcome to Medusa Pro Software version 1.3.6. Started. Reader #0: Alcor Micro USB Smart Card Reader 0 Reader #1: FT SCR2000 0 Reader #2: FT SCR2000 1 Please disconnect battery and USB cable. Model Settings: Interface : eMMC Voltage : 1.8V Bus Mode : 1 Bus speed : Auto Connecting... Device : Samsung eMMC FJ27MB Page size : 512 B Block size : 512 B Block count : 7634944 Size : 3728.00 MB --------------------------------------------------------------- CID Info CID : 150100464A32374D42021933D6D59263 Manufacturer ID : 0X15 Device/BGA : BGA (Discrete embedded) OEM/Application ID : 0X00 Product name : FJ27MB Product revision : 0.2 Product serial number : (hex) 1933D6D5 Manufacturing date : 09/2015 --------------------------------------------------------------- CSD Info CSD : D02701320F5903FFF6DBFFEF8E40400D CSD structure : CSD version No. 1.2 SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5, 4.51, 5.0, 5.01, 5.1 Data read access time1: 15 ms TRAN speed : 26 MHz READ block length : 512 Bytes WP group enable : YES PERM_WRITE_PROTECT : NO TMP_WRITE_PROTECT : NO --------------------------------------------------------------- EXTCSD Info Revision 1.7 (for MMC v5.0, v5.01) Erase block size : 512 Kbytes Boot1 size : 4096 Kbytes Boot2 size : 4096 Kbytes RPMB size : 512 Kbytes Partition config : 01001000 Boot partition enable : Boot partition 1 (Bus width = 1Bit) Boot ACK : Boot acknowledge sent during boot operation Bit Boot bus conditions : 00000000 Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default) Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default) Boot mode : Use single data rate + backward compatible timings in boot operation (default) Partitioning support : Device supports partitioning features Enhanced attribute : Device can have enhanced technological features in partitions and user data area. Max enhanced data size: 1908736 Kbytes Partitions attribute : 0x0 Part setting completed: 0x0 GP partition 1 size : 0 b GP partition 2 size : 0 b GP partition 3 size : 0 b GP partition 4 size : 0 b Enhanced area size : (0x0) 0 b Enhanced area start : (0x0) 0 b Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/FJ27MB_23_05_2017_15_36_14.bin. Connect successful. --------------------------------------------------------------- SW: 1.3.6; FW: 1.16. P00: GPT (00000000, 00000400) P01: proinfo (00000400, 00001800) P02: nvram (00001C00, 00002800) P03: protect1 (00004400, 00005000) P04: protect2 (00009400, 00005000) P05: seccfg (0000E400, 00000200) P06: lk (0000E600, 00000300) P07: boot (0000E900, 00008000) P08: recovery (00016900, 00008000) P09: para (0001E900, 00000400) P10: logo (0001ED00, 00004000) P11: expdb (00022D00, 00005000) P12: frp (00027D00, 00000800) P13: nvdata (00028500, 00010000) P14: metadata (00038500, 00013B00) P15: oemkeystore (0004C000, 00001000) P16: secro (0004D000, 00003000) P17: keystore (00050000, 00004000) P18: system (00054000, 0026C000) P19: cache (002C0000, 00040000) P20: userdata (00300000, 0043FC00) P21: flashinfo (0073FC00, 00008000) --------------------------------------------------------------- Selected scatter file: F:/CHINA/Q MOBILE FF/I6i Q MOBILE MT6580__QMobile__QMobile i6i__QMobile__5.1__ALPS.L1.MP6.V2_TINNO6580.WE.L/I6i Q MOBILE MT6580__QMobile__QMobile i6i__QMobile__5.1__ALPS.L1.MP6.V2_TINNO6580.WE.L/MT6580_Android_scatter.txt. Scatter file type 2. Opened input file: F:/CHINA/Q MOBILE FF/I6i Q MOBILE MT6580__QMobile__QMobile i6i__QMobile__5.1__ALPS.L1.MP6.V2_TINNO6580.WE.L/I6i Q MOBILE MT6580__QMobile__QMobile i6i__QMobile__5.1__ALPS.L1.MP6.V2_TINNO6580.WE.L/preloader_s5030.bin Found 2 eMMC supported CID: eMMC Vendor ID : 90 (Hynix eMMC) eMMC Model ID : 4A01 eMMC Name : H8G1e eMMC CID : 90014A483847316505 eMMC Vendor ID : 15 (Samsung eMMC) eMMC Model ID : 0001 eMMC Name : FJ27MB eMMC CID : 150100464A32374D42 Writing. Please wait... Writing partition preloader... Write data verification is enabled. Write data verification is enabled. Done. Writing partition lk... Write data verification is disabled. Done. Writing partition boot... Write data verification is disabled. Done. Writing partition recovery... Write data verification is disabled. Done. Writing partition logo... Write data verification is disabled. Done. Writing partition secro... Write data verification is disabled. Done. Writing partition cache... Write data verification is disabled. Done. Writing checksums...Done. Writing finished. SW: 1.3.6; FW: 1.16.