[reaz.com]

Welcome to Medusa Pro Software version 1.3.6.
Started.
Reader #0: FT SCR2000 0
Reader #1: FT SCR2000 1
Reader #2: Generic EMV Smartcard Reader 0

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1
Bus speed : Auto

Connecting...
Device : Hynix eMMC H8G4u
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB
---------------------------------------------------------------
CID Info

CID : 90014A48384734759201330475EF347F
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H8G4u
Product revision : 0.1
Product serial number : (hex) 330475EF
Manufacturing date : 03/2017
---------------------------------------------------------------
CSD Info

CSD : D02701320F5903FFFFFFFFE78A40002B
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes

Partition config : 01001000
Boot partition enable : Boot partition 1 (Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit

Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H8G4u_21_05_2017_15_38_02.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.3.6; FW: 1.16.
P00: GPT (00000000, 00002000)
P01: bota0 (00002000, 00002000)
P02: nvram (00004000, 00004000)
P03: lk (00008000, 00001000)
P04: bota1 (00009000, 00001000)
P05: secro (0000A000, 00003800)
P06: seccfg (0000D800, 00000400)
P07: efuse (0000DC00, 00000400)
P08: tee1 (0000E000, 00003000)
P09: bota2 (00011000, 00003000)
P10: efs (00014000, 00004000)
P11: nvdata (00018000, 00010000)
P12: param (00028000, 00004000)
P13: recovery (0002C000, 00008000)
P14: boot (00034000, 00008000)
P15: md1img (0003C000, 00010000)
P16: md1dsp (0004C000, 00002000)
P17: keystore (0004E000, 00004000)
P18: omekeystore (00052000, 00001C00)
P19: proinfo (00053C00, 00001400)
P20: para (00055000, 00000400)
P21: persistent (00055400, 00000400)
P22: steady (00055800, 00000800)
P23: protect1 (00056000, 00004000)
P24: protect2 (0005A000, 00004000)
P25: reserve2 (0005E000, 00002000)
P26: system (00060000, 00604000)
P27: cache (00664000, 000C8000)
P28: hidden (0072C000, 0001E000)
P29: userdata (0074A000, 00744000)

Selected pit file: E:/Samsung/G532G/PIT-SM-G532G-15-03-2017_09-07-10.pit

Open file "E:/Samsung/G532G/G532G_DXU1AQA4_OLB1AQB1/G532G_DXU1AQA4_OLB1AQB1/BL_G532GDXU1AQA4_CL10452964_QB12351285_REV00_user_ low_ship_MULTI_CERT.tar.md5".


Open file "E:/Samsung/G532G/G532G_DXU1AQA4_OLB1AQB1/G532G_DXU1AQA4_OLB1AQB1/AP_G532GDXU1AQA4_CL10452964_QB12351285_REV00_user_ low_ship_MULTI_CERT.tar.md5".


Open file "E:/Samsung/G532G/G532G_DXU1AQA4_OLB1AQB1/G532G_DXU1AQA4_OLB1AQB1/CP_G532GDXU1AQA2_CL10452964_QB12334190_REV00_user_ low_ship_MULTI_CERT.tar.md5".


Open file "E:/Samsung/G532G/G532G_DXU1AQA4_OLB1AQB1/G532G_DXU1AQA4_OLB1AQB1/CSC_OLB_G532GOLB1AQB1_CL10452964_QB12606901_REV00_ user_low_ship_MULTI_CERT.tar.md5".


Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...

Switched to boot area partition 1.
Writing partition BOOTLOADER... Done.

Switched to user area.
Writing partition lk... Done.
Writing partition secro... Done.
Writing partition efuse... Done.
Writing partition tee1... Done.
Writing partition PARAM... Done.
Writing partition recovery... Done.
Writing partition boot... Done.
Writing partition md1img... Done.
Writing partition md1dsp... Done.
Writing partition system... Done.
Writing partition cache... Done.
Writing partition hidden... Done.
Writing partition userdata... Done.
Writing is finished.
SW: 1.3.6; FW: 1.16.