GSM-Forum - View Single Post

lish-hike · 06-05-2017, 15:57

Welcome to Octoplus/Octopus Box LG Software version 2.6.7
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM47
Selected model: LS770
Reading info...Failed!
Port busy
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in
PC Device Manager.
Performed by 2.6.7 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM47
Selected model: LS770
Reading info...Failed!
Port busy
Initializing ADB...OK
Waiting for phone...OK
Model ID: LGLS770
Phone firmware version: LGLS770AT-00-ZV5-SPR-US-AUG-28-2015+16
Kernel version: 3.10.49-g2cd19e1-00005-g906d913
(lgmobile@LGEACI6R1) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Fri Aug
28 13:19:51 KST 201
Android version: 5.1.1
Hardware: Qualcomm Technologies, Inc MSM8916 0
Sending exploit...Failed!
Performed by 2.6.7 Software version.

06-05-2017, 15:57	#1 (permalink)
lish-hike Freak Poster Join Date: Jan 2006 Location: MX-KEY is the BEST NOKIA TOOL Posts: 245 Member: 220123 Status: Offline Thanks Meter: 21	lg ls770 open heddin menu not work Welcome to Octoplus/Octopus Box LG Software version 2.6.7 -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM47 Selected model: LS770 Reading info...Failed! Port busy Initializing ADB...OK Waiting for phone... Please, reconnect phone, enable USB debugging, and try again. To enable USB debugging, please perform the following steps: 1. Disconnect cable 2. Install LG Android ADB drivers 3. Go to "Settings" -> "About phone" -> "Software information" 4. Click on Build number 5 times 5. Enable "Settings" -> "Developer options" -> "USB debugging" option 6. Connect the cable and check, whether ADB interface has appeared in PC Device Manager. Performed by 2.6.7 Software version. -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM47 Selected model: LS770 Reading info...Failed! Port busy Initializing ADB...OK Waiting for phone...OK Model ID: LGLS770 Phone firmware version: LGLS770AT-00-ZV5-SPR-US-AUG-28-2015+16 Kernel version: 3.10.49-g2cd19e1-00005-g906d913 (lgmobile@LGEACI6R1) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Fri Aug 28 13:19:51 KST 201 Android version: 5.1.1 Hardware: Qualcomm Technologies, Inc MSM8916 0 Sending exploit...Failed! Performed by 2.6.7 Software version.