G920t patch certificate REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.
Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
1. Power on phone in download mode (turn off phone, hold vol.down + Camera + Power).
2. Connect phone to PC with USB cable, install drivers if needed.
3. Press 'Repair DRK' button.
Operation: Patch Certificate
Selected model: SM-G920T
Software version: 28.2
Waiting ADB device... Ok
Reading phone info...
Model: SM-G920T
Android version: 6.0.1
Product code: SM-G920TZKAXAR
Phone version: G920TUES5DPK1
PDA version: G920TUES5DPK1
CSC version: G920TXAR5DPK1
CSC country code: USA
CSC sales code: XAR
HW version: REV1.0
Phone SN: R58G90F63KJ
Chip name: EXYNOS7420
Modem board: SHANNON333
Security patch: 2016-11-01
RF cal date: 20150905
IMEI:
Checking Super user right... true
Initialization zTool... Ok
Running zTool, please wait... Ok
Reading modem... Ok
Patching modem... Ok
Writing modem... Ok
Rebooting phone... Ok
Patching CERT check... done
Done with Samsung Tool PRO v.28.2 |