[sajid8282]

J100H was stuck on logo after flash the phone is complete dead . i want to repair Dead boot by Easy Jtag . i did tried by Pit and also by image But the phone still Dead there is some error please Help.

Here is info


HiPower mode is OFF
CMD Pullup Level: 2640 mV
CMD Active Level: 3238 mV
EMMC Device Information :
EMMC CID: 90014A48344732621101E6D8BEC04222
EMMC CSD: D07F01320F5903FFFFFFFFEF8A4040DA
EMMC Manufacture Name: SKHYNIX
EMMC NAME: H4G2b , S/N: E6D8BEC0 , rev. 01
EMMC NAME (HEX): 483447326211
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
Backup saved: H4G2b_E6D8BEC0_20170619_110424.extcsd
EMMC Init completed.

Get firmware version

Firmware info not found

Try to read table form EMMC

HiPower mode is OFF
CMD Pullup Level: 2640 mV
CMD Active Level: 3238 mV
EMMC Device Information :
EMMC CID: 90014A48344732621101E6D8BEC04222
EMMC CSD: D07F01320F5903FFFFFFFFEF8A4040DA
EMMC Manufacture Name: SKHYNIX
EMMC NAME: H4G2b , S/N: E6D8BEC0 , rev. 01
EMMC NAME (HEX): 483447326211
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
Backup saved: H4G2b_E6D8BEC0_20170619_110424.extcsd
EMMC Init completed.

Get firmware version

Firmware info not found

HiPower mode is OFF
CMD Pullup Level: 2640 mV
CMD Active Level: 3238 mV
EMMC Device Information :
EMMC CID: 90014A48344732621101E6D8BEC04222
EMMC CSD: D07F01320F5903FFFFFFFFEF8A4040DA
EMMC Manufacture Name: SKHYNIX
EMMC NAME: H4G2b , S/N: E6D8BEC0 , rev. 01
EMMC NAME (HEX): 483447326211
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
Backup saved: H4G2b_E6D8BEC0_20170619_111327.extcsd
EMMC Init completed.

Operation: Try to read table from emmc

Vendor: Samsung
Searching GPT ...
GPT header is not found
Partition table not found