how? I'am tried with miui8 and rolex_images_7.4.20 developer
Code:
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 425 [MSM8917]
ID_BLOCK_S : 7C74539D
ID_BLOCK_I : 000560E1
ID_BLOCK_L : B1FE6D49F3F22679186CFCAB3FAF6F60
ID_BLOCK_L : 3CB8B211A4F79F4F089330334CBA665B
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8917 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : QE13MB
Boot Ok!
MIAccount reset passed!
Normal reset :
> Select "FORCED FIX" or "REPAIR" in FMT settings, press "Format FS / Reset Settings"
> PowerOn device and use. IF Device stuck on black screen with cable - use another FMT
> Not all devices supported yet! (tested on Hydrogen,Land,Redmi2)
Done!
Elapsed: 00:00:33
Reconnect Power/Cable!
Operation : Reset Settings [ v1.14 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 425 [MSM8917]
ID_BLOCK_S : 7C74539D
ID_BLOCK_I : 000560E1
ID_BLOCK_L : B1FE6D49F3F22679186CFCAB3FAF6F60
ID_BLOCK_L : 3CB8B211A4F79F4F089330334CBA665B
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8917 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : QE13MB
Boot Ok!
Repair block Ok!
Repair block Ok!
Repair block Ok!
Forced Fix Ok!
Done!
Elapsed: 00:00:25
Reconnect Power/Cable!