Quote:
Originally Posted by Daqu  Hello guys.
I have no problem with bubbles in the middle of the screen but in the corners, most of my screens are coming out of the autoclave with 1 to 3 small bubbles in any corner of the LCD.
Here is the configuration of my machine:
Vacum Time: 15s
Lamination: 45s
Debubbling: 20 mins
Outgassing: 5
Temperature: 40C
Pressure: 7 MPA
Tomorrow I will change the lamination time, temperature and time of the LCD in the autoclave, return with the result.
|
I followed some tips from gucesar1 and I programmed my machine to:
Vacum Time: 15s
Lamination: 120s
Debubbling: 10 mins
Outgassing: 5
Temperature: 50C
Pressure: 7 MPA
It worked perfectly, the problem of bubbles in the corners disappeared.