FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on phone in download mode (turn off phone, press vol.down + home + power).
5. Connect phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.
Operation: Flash
Selected model: GT-I9500
Software version: 27.7
File analysis... Ok
Total file size: 0x709BA9B8 (1801 Mb)
Searching USB Flash interface... COM6 detected
Setup connection... Ok
Set PIT file... Ok
Reading PIT from phone... Ok
Sending timh.bin... Ok
Sending obm.bin... Ok
Sending loke_1st.bin... Ok
Sending loke_2nd.bin... Ok
Sending param.lfs... Ok
Sending DTim.Primary... Ok
Sending DTim.Recovery... Ok
Sending DTim.CP... Ok
Sending boot.img... Ok
Sending recovery.img... Ok
Sending system.img... Ok
Sending NVM.img... Ok
Sending radio.img... Ok
Sending cache.img... Ok
Sending hidden.img... Ok
Flashing done (time - 00:02:01)
Done with Samsung Tool PRO v.27.7 |