Card found : A19EC787 , v0136
Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.14
Emergency driver NOT found, make sure it installed!
Download and install from support area following file :
>> InfinityBox_Update_CM2QLM_Drivers_v1.xx.rar
Install it, go to /CM2QLM/Drivers/ and install ALL packages inside
>> If device detected by PC, but not detected by SW :
> 1. Open device manager, find in PORTS section "9008" device
> 2. Change (update) driver to Emergency (or) QHSUSB_BULK
Operation : Read PatternLock [ v1.14 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 237C0FF3
ID_BLOCK_I : 007050E1
ID_BLOCK_L : F0706A9443AFD4D7B0E56F70BF8A0A42
ID_BLOCK_L : 572E903B3CA7179C31FCD10E04EB85C6
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!
Read Ok! Trying decrypt ...
PatternLock sequence : 23698745
Done!
Elapsed: 00:00:18
Reconnect Power/Cable!