 SM-G610F FRP / Reactivation lock is successfully UART
Welcome to Octoplus/Octopus Box Samsung software version 2.6.1
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM6
Selected model: SM-G610F
Searching for UART interface.. COM6
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM6
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/4 attempt)..unsuccessful
Searching for UART interface.. COM6
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (2/4 attempt)..unsuccessful
Searching for UART interface.. COM6
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (3/4 attempt)..success
FRP / Reactivation lock is successfully reseted!
Performed by 2.6.1 Software version. |