[syed tuqeer]

Core : v2.29 , BB5XG FlashEngine : v10.5

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm862__04.51.mcusw
PPM : rm862__04.51.ppm_ma3
CNT : rm862__04.51.image_ma3_059Q046
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
->  Check SW version...
FlashFile version : 04.51
Phone version : 03.18 02-12-12 RM-862 (c) Nokia            
->  Check SW version : Upgrade
Backup CRT308 data...
CRT308 Backup Created
Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Check communication with phone...

SL3 Simlock read (XGOLD) ... Ok
WMDRM Key read ... Ok
CMLA Key read ... Ok

Reboot....

-> If Phone start charge - just reinsert battery fast

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len  : 0x0A
IF xCPUID    : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data  :  1FB300020303010100FF

Sending EBL Loader ... 
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ... 
EBL sent Ok
EBL : Quantum_Bootloader_10.55_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 355499050207245
IMEI 2 : 355499050207252
PCcode : 059Q0D4

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...
CMLA_KEY Data saved...

RPL saved : F:\1+Flashing Software\1+Infinity Box\BEST\Backup\Cert\355499050207245_2nd_XG213.rpl

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

   ===Flashing [MCU]===
File : rm862__04.51.mcusw
Image : rm862__04.51.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ... 
Erase done, time : 00:00:04 
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x017C0000
Erasing, wait ... 
Erase done, time : 00:01:51 
Write , Start : 0x40280000 , Len : 0x017C0000
Flashing , wait ...
Region flash done, time : 00:00:34
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ... 
Erase done, time : 00:00:00 
No write data, skip
[Minor Error] : CRC returned by phone is wrong!
[CHK] : 01003014

   ===Flashing [PPM]===
File : rm862__04.51.ppm_ma3
Image : package_ma3.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41A40000 , Len : 0x00640000
Erasing, wait ... 
Erase done, time : 00:00:26 
Write , Start : 0x41A40000 , Len : 0x003F96F4
Flashing , wait ...
Region flash done, time : 00:00:04
CRC check passed , 0xB428

   ===Flashing [CNT]===
File : rm862__04.51.image_ma3_059Q046
Image : package_ma3_059Q046.image.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x42080000 , Len : 0x01DA0000
Erasing, wait ... 
Erase done, time : 00:03:15 
Write , Start : 0x42080000 , Len : 0x00FC0000
Flashing , wait ...
Region flash done, time : 00:00:20
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ... 
Erase done, time : 00:00:06 
No write data, skip
CRC check passed , 0x4FA2

Flashing done!
Total flash time : 00:06:48
Reboot phone now...

Reading Phone Info....
Connected phone -   205
Software Info:     V 04.51 31-05-13 RM-862 (c) Nokia            
IMEI:  355499050207245
PPM version :   V 04.51 31-05-13 RM-862 (c) Nokia             MA3
Product code:  059Q0D4
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Check and Upload User Certificates ...
Total - 58 certs
Certificates found, skip upload ...
Set phone to Normal mode...

AfterFlash operations done ;D
Done!
Connect phone on selected interface...


Elapsed: 00:07:41
Connect phone on selected interface...


Phone found!
Series 40 Device detected!
read info...  - Ok