| china clone huwei dead after reset fectory setting
i have back this phone before reset but after reset set dead now
device meneger show qualqum mode.
Card found : 3F39398A , v0136
Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.15
Operation : Reset Settings [ v1.15 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device not found!
Check cable, connection and drivers!
Reconnect Power/Cable!
Operation : Read Flash [ v1.15 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 210 [MSM8x09]
ID_BLOCK_S : 02F272DF
ID_BLOCK_I : 009600E1
ID_BLOCK_L : E41C76802FBBA0A39CF1030CCB961E2E
ID_BLOCK_L : A9A46AC5B659810287765B90921D0B30
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8909 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Boot Ok!
Brand : JinXing
ProdName : JXD
ProdModel : JXD
Device : L58
AndroidVer: 5.1
Manufact. : JinXing
QLMxCPU : MSM8909
QLMxPRJ : JXD_L58_V1.0.0_20160926
DevInfo : MSM8909__JinXing__JinXing__ANDR_v5.1__JXD__L58__JX D__JXD_L58_V1.0.0_20160926
Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : misc.img
[Read Ok] : splash.img
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : oem.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin
[Read Ok] : gpt_main2.bin
[Read Ok] : cdt.mbn
[Read Ok] : gpt_backup2.bin
Android Info saved!
Read finished!
Configuration : MSM8909 / eMMC
Firmware Size : 1301 MiB
Done!
Elapsed: 00:02:04
Reconnect Power/Cable!
Operation : Reset Settings [ v1.15 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 210 [MSM8x09]
ID_BLOCK_S : 02F272DF
ID_BLOCK_I : 009600E1
ID_BLOCK_L : E41C76802FBBA0A39CF1030CCB961E2E
ID_BLOCK_L : A9A46AC5B659810287765B90921D0B30
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8909 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Boot Ok!
Format USER ...
Format CACHE ...
Format Ok!
Remove FRP
Reset Ok!
Done!
Elapsed: 00:00:20
Reconnect Power/Cable!
Loading firmware ...
Created by Infinity-Box (c) Chinese Miracle II (c) 2017
Device Brand : JinXing
Device Manufact.: JinXing
Device Model : L58
Device CPU : MSM8909
Device IntName : JXD
Device Version : 5.1
CU_SWVer : JinXing
Device Compile : 9/26/2016 10:18:10 AM
Device Project : JXD_L58_V1.0.0_20160926
Device ExtInfo : JXD
Load Ok!
Operation : Flash [ v1.15 ]
ForceFlashing : Disabled
Verify FW package ...
Verification passed!
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device not found!
Check cable, connection and drivers!
Reconnect Power/Cable!
plz help |